Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR AXLE HUB BOLT
RM19Y0E _52 Drivetrain _002987 AXLE AND DIFFERENTIAL _0015117 REAR AXLE HUB BOLT A

AXLE AND DIFFERENTIAL  REAR AXLE HUB BOLT  REPLACEMENT  


PROCEDURE

Hide 1.REMOVE REAR WHEEL

Hide 42403 2.REMOVE REAR BRAKE DRUM SUB-ASSEMBLY

Hide 42611E 3.REMOVE REAR AXLE HUB BOLT

a.
C152599C01
2.438,0.885 2.781,0.74 false 2.896,0.667 3.417,1 0.521,0.333 10 SST 2.656,1.417 3.156,1.802 0.5,0.385 10 *b 0.844,1.813 1.313,2.146 0.469,0.333 10 *a
*a Hold
*b Turn


Using SST, remove the axle hub bolt.

SST
09628-10011  


Hide 42611E 4.INSTALL REAR AXLE HUB BOLT

a.
C152600C01
2.927,0.302 2.302,0.167 true 2.365,1.49 2.885,1.979 0.521,0.49 10 *b 0.896,1.927 1.25,2.177 0.354,0.25 10 *a 2.073,0.094 2.583,0.5 0.51,0.406 10 *1
*1 Plate Washer
*a Hold
*b Turn


Pass 4 new axle hub bolts through the axle hub and plate washer as shown in the illustration and install it by tightening the nut (M12 x P1.5 mm).

HINT:

A plate washer of 5 mm or thicker is preferable.



Hide 42403 5.INSTALL REAR BRAKE DRUM SUB-ASSEMBLY

Hide 6.ADJUST REAR DRUM BRAKE SHOE CLEARANCE

Hide 7.INSTALL REAR WHEEL

Torque:
103 N*m (1050 kgf*cm, 76 ft.*lbf)