Home › Brake › BRAKE SYSTEM (OTHER) › 3SZ-VE BRAKE PEDAL(for LHD) › 2011.11–2015.08
RM19Y0E _54 Brake _002993 BRAKE SYSTEM (OTHER) _0015148 3SZ-VE BRAKE PEDAL(for LHD) A

BRAKE SYSTEM (OTHER)  3SZ-VE BRAKE PEDAL(for LHD)  REMOVAL  


PROCEDURE

Hide 1.DRAIN CLUTCH FLUID (for Manual Transmission)

Hide 45287 2.REMOVE LOWER STEERING COLUMN COVER

Hide 84340 3.REMOVE STOP LIGHT SWITCH ASSEMBLY

a.

Disconnect the connector from the stop light switch assembly.


b.
C250933

Turn the stop light switch counterclockwise, and remove it.


Hide 84345 4.REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

a.
C250934

Remove the stop light switch mounting adjuster from the pedal support sub-assembly.


Hide 31481A 5.DISCONNECT NO. 1 CLUTCH HOSE (for Manual Transmission)

Hide 31481 6.SEPARATE CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE (for Manual Transmission)

Hide 47264D 7.SEPARATE BRAKE MASTER CYLINDER PUSH ROD CLEVIS

a.
C250935

Remove the clip and push rod pin and separate the push rod clevis from the brake pedal.


Hide 55106 8.REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY

a.
C250915

Remove the 4 bolts and 4 nuts and remove the brake pedal support sub-assembly. (for Manual Transmission)


b.
C250931

Remove the 2 bolts and 4 nuts and remove the brake pedal support sub-assembly. (for Automatic Transmission)