68960
1.INSTALL BACK DOOR STAY ASSEMBLY LH
68950C
2.INSTALL BACK DOOR STAY ASSEMBLY RH
Use the same procedure as for the LH side.
69350
3.INSTALL BACK DOOR LOCK ASSEMBLY
69055B
4.INSTALL BACK DOOR LOCK CYLINDER ASSEMBLY
Install the back door lock cylinder with the lock cylinder retainer as shown in the illustration.
Connect the control rod as shown in the illustration.
81270
5.INSTALL LICENSE PLATE LIGHT ASSEMBLY
76811A
6.INSTALL BACK DOOR OUTSIDE GARNISH
69215
7.INSTALL BACK DOOR OUTSIDE HANDLE
Connect the control cable as shown in the illustration.
Install the 2 nuts.
85176R
8.INSTALL REAR WIPER LINK CAP
85110R
9.INSTALL REAR WIPER MOTOR ASSEMBLY
10.INSTALL REAR WIPER ARM AND BLADE ASSEMBLY
64780A
11.INSTALL BACK DOOR TRIM PANEL ASSEMBLY
Engage the 14 clips and install the back door trim panel assembly.
81570
12.INSTALL CENTER STOP LIGHT ASSEMBLY (for High Mounted Stop Light)
76871
13.INSTALL REAR SPOILER (w/ Rear Spoiler)
67005B
14.INSTALL BACK DOOR PANEL CUSHION
Install the new 4 cushions.