Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
67918D
1.REMOVE REAR DOOR SCUFF PLATE LH (for Full-trim)
67935
2.REMOVE BACK DOOR SCUFF PLATE (for Full-trim)
67881A
3.REMOVE BACK DOOR WEATHERSTRIP (for Full-trim)
73570
4.SEPARATE REAR NO. 2 OUTER SEAT BELT ASSEMBLY LH (for Full-trim)
64740C
5.REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for Full-trim)
62510P
6.REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH (for Semi-trim RH Side)
62520P
7.REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH (for Semi-trim LH Side)
Disengage the 13 clips to remove the front quarter trim panel assembly LH.
81560
8.REMOVE REAR COMBINATION LIGHT ASSEMBLY LH
Disengage the clamp.
Disconnect the connector.
Remove the 2 bolts.
Detach the pin and guide to remove the rear combination light assembly LH.
Remove the rear combination light socket and wire sub-assembly LH grommet.