84520
1.INSTALL CLUTCH START SWITCH ASSEMBLY
Install the clutch start switch assembly so that its end touches the No. 1 clutch pedal cushion.
Tighten the lock nut to the specified torque when adjusting the clutch pedal sub-assembly.
Connect the connector to the clutch start switch assembly.
2.INSPECT AND ADJUST CLUTCH PEDAL
for 1NR-VE: Click hereDrivetrain>CLUTCH>CLUTCH PEDAL(for 1NR-VE)>ADJUSTMENT
for 2NR-VE: Click hereDrivetrain>CLUTCH>CLUTCH PEDAL(for 2NR-VE)>ADJUSTMENT