1.INSPECT TIRES
Check the tires for wear and proper inflation pressure.
| Tire Size | Front
kPa (kgf/cm2, psi) |
Rear
kPa (kgf/cm2, psi) |
|---|---|---|
| 185/70R14 88S | 240 (2.4, 34) | 260 (2.6, 38) |
| 185/65R15 88S |
Using a dial indicator, check the tire runout.
1.4 mm (0.0551 in.) or less (Vertical)
2.0 mm (0.0787 in.) or less (Lateral)
2. ROTATE TIRES
| *A | 14 inch Aluminum Wheel |
| *B | Others |
|
Front |
Rotate the tires, as shown in the illustration.
3.INSPECT WHEEL BALANCE
Check and perform off-car balancing.
If required, perform on-car balancing.
9.5 g (0.021 lb) or less
4.INSPECT FRONT AXLE HUB BEARING
5.INSPECT REAR AXLE SHAFT BEARING