1.INSPECT BRAKE VACUUM CHECK VALVE ASSEMBLY
Check the vacuum check valve.
Slide the 2 clips and remove the vacuum hose.
Click hereEngine / Hybrid System>1NR-VE ENGINE MECHANICAL>ENGINE ASSEMBLY>REMOVAL
| *1 | Check Valve |
| *a | Ventilation |
| *b | No Ventilation |
Check that there is ventilation from the booster to the engine, and no ventilation from the engine to the booster.
If any fault is found, replace the vacuum hose assembly.
Connect the vacuum hose with the 2 clips.
Click hereEngine / Hybrid System>1NR-VE ENGINE MECHANICAL>ENGINE ASSEMBLY>INSTALLATION