1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
16361A
2.REMOVE FAN AND GENERATOR V BELT
for 1NR-VE (Click hereEngine / Hybrid System>1NR-VE ENGINE MECHANICAL>DRIVE BELT>REMOVAL)
for 2NR-VE (Click hereEngine / Hybrid System>2NR-VE ENGINE MECHANICAL>DRIVE BELT>REMOVAL)
88711
3.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE (for RHD)
Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler compressor assembly.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
88711
4.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE (for LHD)
Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler compressor assembly.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
88712D
5.DISCONNECT SUCTION HOSE (for RHD)
Remove the bolt and disconnect the suction hose from the cooler compressor assembly.
Remove the O-ring from the suction hose.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
88712D
6.DISCONNECT SUCTION HOSE (for LHD)
Remove the bolt and disconnect the suction hose from the cooler compressor assembly.
Remove the O-ring from the suction hose.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
88320
7.REMOVE COOLER COMPRESSOR ASSEMBLY
Disconnect the connector.
Remove the 4 bolts and the cooler compressor assembly.