17750A
1.REMOVE AIR CLEANER INLET ASSEMBLY
22030
2.REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY
11452
3.REMOVE OIL LEVEL DIPSTICK GUIDE
Disconnect the 2 harness clamps and remove the bolt and oil level dipstick guide.
Remove the O-ring from the oil level dipstick guide.
12261
4.DISCONNECT VENTILATION HOSE
Loosen the clip and disconnect ventilation hose from the cylinder head cover sub-assembly.
23827A
5.REMOVE NO. 2 FUEL VAPOR FEED HOSE
Remove the No. 2 fuel vapor feed hose.
44730A
6.DISCONNECT NO. 1 VACUUM HOSE
Loosen the clip and disconnect the No. 1 vacuum hose from the intake manifold.
7.REMOVE GROMMET
Remove the grommet from the intake manifold.
17111
8.REMOVE INTAKE MANIFOLD
Disconnect the 4 harness clamps and engine wire harness from the intake manifold.
Remove the bolt and wire harness bracket.
|
Bolt |
|
Nut |
Remove the 3 bolts, 2 nuts and intake manifold.
12261
9.REMOVE VENTILATION HOSE
Loosen the clip and remove the ventilation hose.
17177
10.REMOVE NO. 1 INTAKE MANIFOLD TO HEAD GASKET
Remove the No. 1 intake manifold to head gasket from the intake manifold.