Home › Engine / Hybrid System › 2NR-VE COOLING › THERMOSTAT › from 2015.08
RM19Y0E _51 Engine / Hybrid System _042282 2NR-VE COOLING _0196239 THERMOSTAT A

2NR-VE COOLING  THERMOSTAT  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 27020 3.REMOVE GENERATOR ASSEMBLY

Hide 16281 4.DISCONNECT NO. 4 WATER BY-PASS HOSE

a.
A364881

Loosen the clip and disconnect the No. 4 water by-pass hose.


Hide 16572D 5.DISCONNECT NO. 2 RADIATOR HOSE

a.
A360186

Loosen the clip and disconnect the No. 2 radiator hose from the water inlet sub-assembly with thermostat.


Hide 16031 6.REMOVE WATER INLET SUB-ASSEMBLY WITH THERMOSTAT

a.
A256582

Remove the 3 bolts and water inlet sub-assembly with thermostat.


Hide 16326 7.REMOVE NO. 2 WATER INLET HOUSING GASKET

a.
A256583C04
2.458,0.615 2.115,0.615 2.115,0.615 1.563,0.979 true 2.49,0.531 2.802,0.688 0.313,0.156 10 false *1
*1 No. 2 Water Inlet Housing Gasket


Remove the No. 2 water inlet housing gasket from the water inlet sub-assembly with thermostat.


Hide 8.REMOVE THERMOSTAT

a.
A256584C05
1.958,0.135 2.125,0.135 2.125,0.135 2.542,0.573 true 1.781,0.063 2.094,0.219 0.313,0.156 10 false *1
*1 Frame


Remove the frame from the water inlet sub-assembly.

HINT:

Using needle nose pliers, push down on the frame to compress the spring. While the spring is compressed, turn the frame to remove it from the water inlet sub-assembly.



b.

Remove the spring and element.