Home › Vehicle Exterior › DOOR / HATCH › HOOD LOCK CONTROL CABLE ASSEMBLY › from 2015.08
RM19Y0E _59 Vehicle Exterior _003017 DOOR / HATCH _0015261 HOOD LOCK CONTROL CABLE ASSEMBLY A

DOOR / HATCH  HOOD LOCK CONTROL CABLE ASSEMBLY  REMOVAL  


PROCEDURE

Hide 52119A 1.REMOVE FRONT BUMPER COVER

Hide 67914B 2.REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)

Hide 67913B 3.REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)

HINT:

Use the same procedure as for the LH side.


Hide 62112 4.REMOVE COWL SIDE TRIM BOARD LH (for LHD)

Hide 62111C 5.REMOVE COWL SIDE TRIM BOARD RH (for RHD)

HINT:

Use the same procedure as for the LH side.


Hide 53629 6.REMOVE NO. 2 HOOD LOCK CONTROL CABLE COVER (for Tropic)

a.
B427197

Remove the bolt.


b.

Disengage the 2 claws to remove the No. 2 hood lock control cable cover.


Hide 88561J 7.REMOVE UPPER AIR INLET GRILLE (except Tropic)

a.
B411163

Remove the bolt.


b.

Disengage the 3 claws to remove the upper air inlet grille.


Hide 53510 8.REMOVE HOOD LOCK ASSEMBLY

HINT:

Use the same procedure for the RHD and LHD vehicles.


a.
B297765

Remove the 3 bolts.


b.
B297769

Disconnect the hood lock control cable assembly to remove the hood lock assembly.


Hide 53630 9.REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY

a.

Remove the 2 bolts.


b.

Disconnect the cable clamps as shown in the illustration.


c.

Remove the hood lock control cable assembly.

B415919C01
0.219,0.135 0.531,0.292 0.313,0.156 10 false *A
*A for LHD - -


B411151C01
0.229,0.208 0.542,0.365 0.313,0.156 10 false *A
*A for RHD - -