Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR › from 2015.08
RM19Y0E _59 Vehicle Exterior _003017 DOOR / HATCH _0015264 BACK DOOR A

DOOR / HATCH  BACK DOOR  DISASSEMBLY  


PROCEDURE

Hide 67005B 1.REMOVE BACK DOOR PANEL CUSHION

a.
B290319

Remove the 4 cushions.


Hide 76871 2.REMOVE REAR SPOILER (w/ Rear Spoiler)

Hide 81570 3.REMOVE CENTER STOP LIGHT ASSEMBLY (w/ Rear Spoiler)

Hide 64780A 4.REMOVE BACK DOOR TRIM PANEL ASSEMBLY

a.
B290320

Disengage the 14 clips to remove the back door trim panel assembly.


Hide 5.REMOVE REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper)

Hide 85110R 6.REMOVE REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper)

Hide 85176R 7.REMOVE REAR WIPER LINK CAP (w/ Rear Wiper)

Hide 69215 8.REMOVE BACK DOOR OUTSIDE HANDLE

a.
B290321

Remove the 2 nuts.


b.
B290322

Disconnect the control cable and remove the back door outside handle sub-assembly.


Hide 76811A 9.REMOVE BACK DOOR OUTSIDE GARNISH

Hide 81270 10.REMOVE LICENSE PLATE LIGHT ASSEMBLY

Hide 69055B 11.REMOVE BACK DOOR LOCK CYLINDER ASSEMBLY

a.
B161291

Disconnect the control rod as shown in the illustration.


b.
B161293

Remove the lock cylinder retainer, then remove the back door lock cylinder assembly.

NOTICE:

Do not drop or damage the lock cylinder when removing the lock cylinder retainer.



Hide 69350 12.REMOVE BACK DOOR LOCK ASSEMBLY

Hide 68960 13.REMOVE BACK DOOR STAY ASSEMBLY LH

Hide 68950C 14.REMOVE BACK DOOR STAY ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.