68960
1.INSTALL BACK DOOR STAY ASSEMBLY LH
68950C
2.INSTALL BACK DOOR STAY ASSEMBLY RH
Use the same procedure as for the LH side.
69350
3.INSTALL BACK DOOR LOCK ASSEMBLY
69055B
4.INSTALL BACK DOOR LOCK CYLINDER ASSEMBLY
Install the back door lock cylinder with the lock cylinder retainer as shown in the illustration.
Connect the control rod as shown in the illustration.
81270
5.INSTALL LICENSE PLATE LIGHT ASSEMBLY
76811A
6.INSTALL BACK DOOR OUTSIDE GARNISH
69215
7.INSTALL BACK DOOR OUTSIDE HANDLE
Connect the control cable as indicated by the arrow in the order shown in the illustration.
Install the back door outside handle with the 2 nuts.
85176R
8.INSTALL REAR WIPER LINK CAP (w/ Rear Wiper)
85110R
9.INSTALL REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper)
10.INSTALL REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper)
64780A
11.INSTALL BACK DOOR TRIM PANEL ASSEMBLY
Engage the 14 clips to install the back door trim panel assembly.
81570
12.INSTALL CENTER STOP LIGHT ASSEMBLY (w/ Rear Spoiler)
76871
13.INSTALL REAR SPOILER (w/ Rear Spoiler)
67005B
14.INSTALL BACK DOOR PANEL CUSHION
Install new 4 cushions.