Home › Vehicle Interior › INTERIOR PANELS / TRIM › LOWER INSTRUMENT PANEL › from 2016.09
RM19Y0E _58 Vehicle Interior _003015 INTERIOR PANELS / TRIM _0015244 LOWER INSTRUMENT PANEL A

INTERIOR PANELS / TRIM  LOWER INSTRUMENT PANEL  INSTALLATION  


PROCEDURE

Hide 55312 1.INSTALL LOWER INSTRUMENT PANEL

a.

Install the lower instrument panel with the 6 bolts <B> and 2 bolts <D>.

Torque:
bolt<B> : 5.0 N*m (51 kgf*cm, 44 in.*lbf)


b.

Connect each connector and engage the clamp.


Hide 85535E 3.INSTALL NO. 2 POWER OUTLET SOCKET COVER

Hide 85530 4.INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY

Hide 55539 5.INSTALL SPARE SWITCH HOLE COVER (w/o USB Audio System)

a.

Engage the 2 claws to install the spare switch hole cover.


Hide 86190C 6.INSTALL STEREO JACK ADAPTER ASSEMBLY (w/ USB Audio System)

Hide 55432B 7.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL

a.

Engage the clamp.


b.

Connect each connector.


c.

Engage the 5 guides and 4 claws to install the lower instrument panel finish panel.


Hide 55561A 8.INSTALL GLOVE COMPARTMENT DOOR LOCK STRIKER

a.

Install the glove compartment door lock striker with the bolt <B> and screw <A>.

Torque:
bolt<B> : 8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 84162A 9.INSTALL REAR FOG LAMP SWITCH

Hide 55539N 10.INSTALL SPARE SWITCH HOLE COVER (w/o Rear Fog Light)

a.

Engage the 2 claws to install the spare switch hole cover.


Hide 55539F 11.INSTALL SPARE SWITCH HOLE COVER (w/o Rear Window Defogger)

a.

Engage the 2 claws to install the spare switch hole cover.


Hide 84790 12.INSTALL REAR WINDOW DEFOGGER SWITCH ASSEMBLY (w/ Rear Window Defogger)

Hide 55547 13.INSTALL REMOTE CONTROL MIRROR HOLE COVER (w/o Power Mirror Control System)

a.

Engage the 4 claws to install the remote control mirror hole cover.


Hide 84870A 14.INSTALL OUTER MIRROR SWITCH ASSEMBLY (w/ Power Mirror Control System)

Hide 55539D 15.INSTALL SPARE SWITCH HOLE COVER (w/o Tire Pressure Warning System)

a.

Engage the 2 claws to install the spare switch hole cover.


Hide 55539B 16.INSTALL NO. 2 SPARE SWITCH HOLE COVER (w/o VSC)

a.

Engage the 2 claws to install the No. 2 spare switch hole cover.


Hide 84746 17.INSTALL TIRE PRESSURE WARNING SWITCH (w/ Tire Pressure Warning System)

Hide 55545 19.INSTALL FUSE BOX OPENING COVER (for LHD)

a.

w/o VSC

Engage the 7 claws to install the fuse opening cover.


b.

w/ VSC

i.

Connect each connector.


ii.

Engage the 10 claws to install the fuse opening cover.



Hide 55545 20.INSTALL FUSE BOX OPENING COVER (for RHD)

a.

Engage the 7 claws to install the fuse opening cover.


Hide 55420A 21.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

a.

Engage the 2 guide and 4 claws to install the center instrument cluster finish panel assembly.


Hide 55476C 22.INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH

a.

Engage the 5 claws to install the instrument panel finish plate garnish.


Hide 55458B 23.INSTALL INSTRUMENT LOWER COVER

a.

Engage the 2 claws.


b.

Install the instrument lower cover with the screw <A>.


Hide 55642 24.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER

a.

Engage the 2 guides and 4 claws to install the No. 2 instrument panel under cover.


Hide 55606 25.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

a.

Engage the 3 guides.


b.

Install the No. 1 instrument panel under cover sub-assembly with the 3 clips.


Hide 55608 26.INSTALL NO. 3 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

HINT:

Use the same procedure for the No. 1 instrument panel under cover sub-assembly.


Hide 83100 29.INSTALL COMBINATION METER ASSEMBLY

Hide 55301 30.INSTALL INSTRUMENT PANEL SUB-ASSEMBLY