Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM › 2016.10–2018.05
RM32K0E _51 Engine / Hybrid System _059620 HYBRID / BATTERY CONTROL _0292486 HYBRID CONTROL SYSTEM C

HYBRID / BATTERY CONTROL  HYBRID CONTROL SYSTEM  P30004B  Hybrid/EV Battery Control System Over Temperature  


DESCRIPTION

The hybrid vehicle control ECU monitors its internal operation and detects the following malfunction.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P30004B Hybrid/EV Battery Control System Over Temperature The HV battery temperature becomes too high due to a malfunction in the HV system.
(1 trip detection logic)
·

Hybrid vehicle control ECU

·

HV battery

·

Battery voltage sensor


Does not come on Master Warning Light:
Comes on

Related Data List
DTC No. Data List
P30004B
·

Hybrid Battery Temperature 1 to 3

·

Hybrid Battery Cooling Fan Inhaling Air Temperature

·

Ambient Temperature

·

Hybrid Battery Current

·

Hybrid Battery SOC

·

Hybrid Battery Cooling Fan 1 Drive Status

·

Hybrid Battery Cooling Fan



CONFIRMATION DRIVING PATTERN

HINT:

After repairs have been completed, clear the DTCs and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID CONTROL SYSTEM>UTILITY


1.

Connect the GTS to the DLC3.

2.

Turn the power switch on (IG) and turn the GTS on.

3.

Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

4.

Turn the power switch off and wait for 2 minutes or more.

5.

Turn the power switch on (IG) and turn the GTS on.

6.

Drive the vehicle for approximately 10 minutes according to the freeze frame data items "Vehicle Speed", "Hybrid Battery Temperature 1 to 3", "Hybrid Battery Cooling Fan Inhaling Air Temperature", "Ambient Temperature" and "Hybrid Battery Current".

7.

Enter the following menus: Powertrain / Hybrid Control / Utility / All Readiness.

8.

Check the DTC judgment result.

HINT:
·

If the judgment result shows NORMAL, the system is normal.

·

If the judgment result shows ABNORMAL, the system has a malfunction.

·

If the judgment result shows INCOMPLETE or N/A, perform driving pattern again.




CAUTION / NOTICE / HINT

CAUTION:
·
A358021C02
0.531,4.146 0.844,4.344 0.313,0.198 10 false *a 2.74,4.146 3.052,4.344 0.313,0.198 10 false *b
*a Dealer
*b Battery Collection Agent


When disposing of an HV battery, make sure to return it through an authorized collection agent who is capable of handling it safely. If the HV battery is returned via the manufacturer specified route, it will be returned properly and in a safe manner by an authorized collection agent.

-

Accidents such as electric shock may result if the HV battery is disposed of improperly or abandoned. Therefore, make sure to return all HV batteries through an authorized collection agent.



·
A358020

After removing the HV battery, keep it away from water. Exposure to water may cause the HV battery to produce heat, resulting in a fire.



PROCEDURE

1.CHECK DTC OUTPUT (HYBRID CONTROL)
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.


d.

Check for DTCs.

Powertrain > Hybrid Control > Trouble Codes
50001 397
Result:
Result Proceed to
P30004B only is output. A
DTCs other than P30004B are also output. B



e.

Turn the power switch off.



A

2.CLEAN NO. 1 HV BATTERY INTAKE FILTER

B

2.CLEAN NO. 1 HV BATTERY INTAKE FILTER
a.
A414646C01
2.25,1.833 1.917,1.583 true 2.323,1.729 2.49,1.896 0.167,0.167 10 true *a
*a Intake Port


Check the HV battery cooling system intake port for blockage.

HINT:

If anything is blocking the HV battery cooling system intake port, remove it.



b.

Clean the No. 1 HV battery intake filter.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>BATTERY COOLING FILTER>INSPECTION


Result:
Proceed to
NEXT



NEXT

3.CHECK FREEZE FRAME DATA (HYBRID CONTROL)
3.CHECK FREEZE FRAME DATA (HYBRID CONTROL)
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.


d.

Read the freeze frame data of DTC P30004B.

Powertrain > Hybrid Control > Trouble Codes
50001 397
NOTICE:
A413811C04
0.479,1.375 0.792,1.531 0.313,0.156 10 false *a 2.51,0.406 2.823,0.563 0.313,0.156 10 false *b 2.688,1.938 3,2.094 0.313,0.156 10 false *c 1.26,1.385 1.573,1.542 0.313,0.156 10 false *a 2.083,1.375 2.396,1.531 0.313,0.156 10 false *a 2.521,1.458 2.833,1.615 0.313,0.156 10 false *a 2.927,1.365 3.24,1.521 0.313,0.156 10 false *a 0.021,0.021 3.396,0.219 3.375,0.198 10 false Freeze Frame Data Recording Example
*a Freeze Frame Data Recorded
*b DTC Stored
*c Time


Although freeze frame data is recorded before and after a DTC is stored, for this step it is only necessary to read the freeze frame data recorded before "0s" (when the DTC was stored).


Result:
Result Proceed to
Other than below A
The sum of the value of each hybrid battery block voltage ("Hybrid Battery Block 1 to 9 Voltage") is less than the value of "VL-Voltage before Boosting" by 10 V or more. B



e.

Turn the power switch off.



A

4.CHECK FREEZE FRAME DATA (HYBRID CONTROL)

B

7.REPLACE BATTERY VOLTAGE SENSOR
4.CHECK FREEZE FRAME DATA (HYBRID CONTROL)
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.


d.

Read the freeze frame data of DTC P30004B.

Powertrain > Hybrid Control > Trouble Codes
50001 397
NOTICE:

Although freeze frame data is recorded before and after a DTC is stored, for this step it is only necessary to read the freeze frame data recorded at "0s" (when the DTC was stored).



Result:
Result Proceed to
Other than below A
The value of any of "Hybrid Battery Temperature 1 to 3" is 80°C or more. B


e.

Turn the power switch off.



A

5.READ VALUE USING GTS (DATA LIST)

B

8.REPLACE HYBRID VEHICLE CONTROL ECU
5.READ VALUE USING GTS (DATA LIST)
a.

Apply the parking brake and secure the wheels using chocks.

NOTICE:

Perform this test with the AUTO function (shift-linked function) of the electronic parking brake system off.


HINT:

When the electric parking brake switch assembly is pulled 2 times (2 lock operations), the maximum amount of braking force is applied.



b.

Connect the GTS to the DLC3.


c.

Turn the power switch on (READY).


d.

Enter the following menus: Powertrain / Hybrid Control / Data List.

Powertrain > Hybrid Control > Data List
Tester Display
Hybrid Battery Temperature 1
Hybrid Battery Temperature 2
Hybrid Battery Temperature 3
50003 397 198,199,200

e.

According to the display on the GTS, read the Data List and check that the value of each "Hybrid Battery Temperature 1 to 3" is 40°C or less.

HINT:

If the value of any of "Hybrid Battery Temperature 1 to 3" is more than 40°C, turn the power switch off and wait until the values to decrease to 40°C or less before continuing this procedure.



f.

Enter the following menus: Powertrain / Hybrid Control / Data List.

Powertrain > Hybrid Control > Data List
Tester Display
Hybrid Battery Block 1 Voltage
Hybrid Battery Block 2 Voltage
Hybrid Battery Block 8 Voltage
Hybrid Battery Block 9 Voltage
50003 397 161,162,168,169

g.

According to the display on the GTS, read the Data List and check the value of each "Hybrid Battery Block 1, 2, 8 and 9 Voltage" with the power switch on (IG).

A458250C05
4.99,2.365 5.281,1.844 5.281,1.844 5.479,1.844 false 1.188,3.333 1.5,3.49 0.313,0.156 10 false *a 1.75,3.344 2.063,3.5 0.313,0.156 10 false *b 2.25,3.344 2.563,3.5 0.313,0.156 10 false *c 2.688,3.333 3,3.49 0.313,0.156 10 false *d 3.167,3.333 3.479,3.49 0.313,0.156 10 false *e 3.667,3.344 3.979,3.5 0.313,0.156 10 false *f 4.083,3.333 4.396,3.49 0.313,0.156 10 false *g 4.583,3.344 4.896,3.5 0.313,0.156 10 false *h 5.271,3.344 5.583,3.5 0.313,0.156 10 false *i 0.031,0.042 3.417,0.729 3.385,0.688 10 false Example for when the difference of voltage value occurs between the hybrid battery block 2 and 8. 1.771,3.49 1.927,3.688 0.156,0.198 10 false A 4.625,3.5 4.781,3.698 0.156,0.198 10 false B 4.698,0.042 7.104,0.281 2.406,0.24 10 false A: Lowest hybrid battery block voltage 4.708,0.448 7.083,0.677 2.375,0.229 10 false B: Highest hybrid battery block voltage 5.542,1.771 6.458,1.969 0.917,0.198 10 false 0.3V or more
*a Hybrid Battery Block 1 Voltage *b Hybrid Battery Block 2 Voltage
*c Hybrid Battery Block 3 Voltage *d Hybrid Battery Block 4 Voltage
*e Hybrid Battery Block 5 Voltage *f Hybrid Battery Block 6 Voltage
*g Hybrid Battery Block 7 Voltage *h Hybrid Battery Block 8 Voltage
*i Hybrid Battery Block 9 Voltage - -



Result:
Result Proceed to
Other than below A
The difference between the lowest and highest HV battery block voltage is 0.3 V or more. B


h.

Turn the power switch off.



A

6.READ VALUE USING GTS (DATA LIST)

B

8.REPLACE HYBRID VEHICLE CONTROL ECU
6.READ VALUE USING GTS (DATA LIST)
a.

Apply the parking brake and secure the wheels using chocks.

NOTICE:

Perform this test with the AUTO function (shift-linked function) of the electronic parking brake system off.


HINT:

When the electric parking brake switch assembly is pulled 2 times (2 lock operations), the maximum amount of braking force is applied.



b.

Connect the GTS to the DLC3.


c.

Turn the power switch on (READY).


d.

Enter the following menus: Powertrain / Hybrid Control / Data List.

Powertrain > Hybrid Control > Data List
Tester Display
Hybrid Battery Temperature 1
Hybrid Battery Temperature 2
Hybrid Battery Temperature 3
50003 397 198,199,200

e.

According to the display on the GTS, read the Data List and check that the value of each "Hybrid Battery Temperature 1 to 3" is 40°C or less.

HINT:

If the value of any of "Hybrid Battery Temperature 1 to 3" is more than 40°C, turn the power switch off and wait until the values to decrease to 40°C or less before continuing this procedure.



f.

Enter the following menus: Powertrain / Hybrid Control / Data List.

Powertrain > Hybrid Control > Data List
Tester Display
Hybrid Battery Block 3 Voltage
Hybrid Battery Block 4 Voltage
Hybrid Battery Block 5 Voltage
Hybrid Battery Block 6 Voltage
Hybrid Battery Block 7 Voltage
50003 397 163,164,165,166,167

g.

According to the display on the GTS, read the Data List and check the value of each "Hybrid Battery Block 3 to 8 Voltage" with the power switch on (IG).

A458251C04
4.458,1.583 4.771,0.99 4.771,0.99 5.021,0.99 false 1.188,3.333 1.5,3.49 0.313,0.156 10 false *a 1.729,3.333 2.042,3.49 0.313,0.156 10 false *b 2.229,3.333 2.542,3.49 0.313,0.156 10 false *c 2.688,3.344 3,3.5 0.313,0.156 10 false *d 3.146,3.344 3.458,3.5 0.313,0.156 10 false *e 3.635,3.344 3.948,3.5 0.313,0.156 10 false *f 4.083,3.333 4.396,3.49 0.313,0.156 10 false *g 4.771,3.333 5.083,3.49 0.313,0.156 10 false *h 5.25,3.333 5.563,3.49 0.313,0.156 10 false *i 0.031,0.042 3.417,0.531 3.385,0.49 10 false Example for when the difference of voltage value occurs between the hybrid battery block 4 and 7. 4.677,0.052 7.042,0.271 2.365,0.219 10 false A: Lowest hybrid battery block voltage 4.688,0.458 7.073,0.677 2.385,0.219 10 false B: Highest hybrid battery block voltage 5.073,0.906 5.99,1.104 0.917,0.198 10 false 0.3V or more 2.271,3.51 2.427,3.708 0.156,0.198 10 false A 4.135,3.521 4.292,3.719 0.156,0.198 10 false B
*a Hybrid Battery Block 1 Voltage *b Hybrid Battery Block 2 Voltage
*c Hybrid Battery Block 3 Voltage *d Hybrid Battery Block 4 Voltage
*e Hybrid Battery Block 5 Voltage *f Hybrid Battery Block 6 Voltage
*g Hybrid Battery Block 7 Voltage *h Hybrid Battery Block 8 Voltage
*i Hybrid Battery Block 9 Voltage - -



Result:
Result Proceed to
Other than below A
The difference between the lowest and highest HV battery block voltage is 0.3 V or more. B


h.

Turn the power switch off.



A

END

B

8.REPLACE HYBRID VEHICLE CONTROL ECU
7.REPLACE BATTERY VOLTAGE SENSOR

NEXT

8.REPLACE HYBRID VEHICLE CONTROL ECU

NEXT