Use the same procedure as for the LH and RH sides.
The procedure described below is for the LH side.
84234
1.INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY
|
Install in this Direction |
Using a T30 "TORX" socket wrench, install the rear door courtesy light switch assembly with the screw.
Connect the connector.
62552F
2.INSTALL REAR SEAT SIDE GARNISH
71304C
3.INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY
62332A
4.CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP
Connect the rear door opening trim weatherstrip to the area shown in the illustration.
76974F
5.INSTALL REAR UNDER SIDE COVER LH
67918A
6.INSTALL REAR DOOR SCUFF PLATE
7.INSTALL REAR SEAT ASSEMBLY