Home › Vehicle Interior › INTERIOR PANELS / TRIM › INSTRUMENT PANEL SAFETY PAD › 2019.09–2022.01
RM32K0E _58 Vehicle Interior _062036 INTERIOR PANELS / TRIM _0302275 INSTRUMENT PANEL SAFETY PAD A

INTERIOR PANELS / TRIM  INSTRUMENT PANEL SAFETY PAD  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for LHD and RHD vehicles.

·

The procedure listed below is for the LHD vehicles.



PROCEDURE

Hide 55961 1.REMOVE NO. 1 SIDE DEFROSTER NOZZLE

a.
B459258

Disengage the claws to remove the No. 1 side defroster nozzle.


Hide 55962 2.REMOVE NO. 2 SIDE DEFROSTER NOZZLE

a.
B459259

Disengage the claws to remove the No. 2 side defroster nozzle.


Hide 55950G 3.REMOVE DEFROSTER NOZZLE ASSEMBLY

a.
B459260

Remove the 3 screws <D>.


b.

Disengage the guides to remove the defroster nozzle assembly.


c.

w/ Antenna Divider:

i.

Disconnect the connector.



Hide 55084E 4.REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY

a.
B459261C01
0.25,0.927 0.365,0.708 true 1.177,0.542 1.396,0.469 true 2.146,0.906 2.458,0.781 true 2.135,1.969 2.365,1.833 true 2.979,1.781 3.188,1.625 true 2.469,0.688 2.677,0.875 0.208,0.188 10 true *a 0.167,0.938 0.375,1.115 0.208,0.177 10 true *b 1.406,0.385 1.615,0.563 0.208,0.177 10 true *b 2.365,1.74 2.563,1.896 0.198,0.156 10 true *b 3.198,1.542 3.396,1.698 0.198,0.156 10 true *b
*a Clamp
*b Guide


Disengage the clamp to disconnect the No. 2 instrument panel wire.


b.

Remove the 3 screws <D>.


c.

Disengage the guides to remove the No. 1 heater to register duct sub-assembly.


Hide 55086 5.REMOVE NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY

a.
B513006

Remove the 3 screws <D>.


b.

Disengage the guides to remove the No. 3 heater to register duct sub-assembly.


c.
B461419

w/ Ion Generator:

i.

Disconnect the rear air duct sub-assembly.



Hide 55650 6.REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

a.
B459263

Remove the 4 screws <D>.


b.

Disengage the guides to remove the No. 1 instrument panel register assembly.


Hide 55660 7.REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

a.
B459264

Remove the 3 screws <D>.


b.

Disengage the guides to remove the No. 2 instrument panel register assembly.


Hide 73960A 8.REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

Hide 88051A 9.REMOVE ION GENERATOR SUB-ASSEMBLY (w/ Ion Generator)

Hide 89120A 11.REMOVE AUTOMATIC LIGHT CONTROL SENSOR

Hide 82142 12.REMOVE NO. 2 INSTRUMENT PANEL WIRE

a.
B514919C01
0.083,0.146 0.333,0.333 0.25,0.188 12 true *A 0.083,2.49 0.323,2.677 0.24,0.188 12 true *B
*A for LHD
*B for RHD


w/ Ion Generator:

i.

Disengage the clamps to remove the No. 2 instrument panel wire.



b.
B514920C01
0.104,0.167 0.323,0.344 0.219,0.177 12 true *A 0.083,2.469 0.302,2.656 0.219,0.188 12 true *B
*A for LHD
*B for RHD


w/o Ion Generator:

i.

Disengage the clamps to remove the No. 2 instrument panel wire.



Hide 55328 13.REMOVE NO. 1 INSTRUMENT PANEL PIN

HINT:

Use the same procedure as for the opposite side.


a.
B459267

Remove the screw <D>.


b.

Disengage the guide to remove the No. 1 instrument panel pin.


Hide 55355 14.REMOVE NO. 1 INSTRUMENT PANEL CUSHION

a.
B459268

Remove the No. 1 instrument panel cushion.


Hide 55356C 15.REMOVE NO. 2 INSTRUMENT PANEL CUSHION (w/ Cushion)

a.
B557965

Remove the No. 2 instrument panel cushion.


Hide 55357B 16.REMOVE NO. 3 INSTRUMENT PANEL CUSHION (w/ Cushion)

a.
B557967

Remove the No. 3 instrument panel cushion.