G92PD
1.INSTALL NO. 2 HV BATTERY PROTECTOR
Be sure to wear insulated gloves and protective goggles.
Perform this procedure only when replacement of the No. 2 HV battery protector is necessary.
Engage the claw and install the No. 2 HV battery protector to the HV battery.
Connect each wire harness to the No. 2 HV battery protector.
89890A
2.INSTALL BATTERY ECU ASSEMBLY
Be sure to wear insulated gloves and protective goggles.
Install the battery ECU assembly to the HV battery with the 3 nuts.
| *a | Black Label |
Check color of the label.
If the battery ECU assembly has been struck or dropped, replace it.
Connect the 6 battery ECU assembly connectors.
Make sure that the connectors are connected securely.
G92PC
3.INSTALL NO. 1 HV BATTERY PROTECTOR
Be sure to wear insulated gloves and protective goggles.
Engage the 2 claws to install the No. 1 HV battery protector to the No. 2 HV battery protector.
Install the 3 nuts.
Engage the clamp to connect the wire harness.
G920Q
4.INSTALL NO. 1 HYBRID BATTERY SHIELD SUB-ASSEMBLY
Be sure to wear insulated gloves and protective goggles.
Install the No. 1 hybrid battery shield sub-assembly to the HV battery with the nut.
Engage the clip.
G929A
5.INSTALL NO. 1 HV BATTERY HOSE
Be sure to wear insulated gloves and protective goggles.
Install the No. 1 HV battery hose to the HV battery with the clip.
G920L
6.INSTALL UPPER NO. 1 HYBRID BATTERY COVER SUB-ASSEMBLY
Be sure to wear insulated gloves and protective goggles.
Install the upper No. 1 hybrid battery cover sub-assembly to the HV battery with the 6 bolts and 5 nuts.
82161
7.CONNECT FLOOR WIRE
G92PF
8.INSTALL NO. 4 HV BATTERY PROTECTOR
82161
9.CONNECT FLOOR WIRE
G9290A
10.INSTALL HYBRID BATTERY HOSE ASSEMBLY
G92N4A
11.INSTALL NO. 1 HV BATTERY COVER PANEL RH
71033
12.INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY
76971G
13.INSTALL REAR UNDER COVER
76974F
14.INSTALL REAR UNDER SIDE COVER LH
67918A
15.INSTALL REAR DOOR SCUFF PLATE LH
76973F
16.INSTALL REAR UNDER SIDE COVER RH
Use the same procedure as for the LH side.
67917A
17.INSTALL REAR DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
72693
18.INSTALL REAR SEAT CUSHION LOCK HOOK
19.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY
G3834
20.INSTALL SERVICE PLUG GRIP
21.PERFORM INITIALIZATION