Home › Engine / Hybrid System › 2ZR-FXE (HYBRID / BATTERY CONTROL) › HYBRID CONTROL SYSTEM (for NICKEL METAL HYDRIDE BATTERY) › from 2019.09
RM32K0E _51 Engine / Hybrid System _083958 2ZR-FXE HYBRID / BATTERY CONTROL _0404406 HYBRID CONTROL SYSTEM(for NICKEL METAL HYDRIDE BATTERY) C

2ZR-FXE HYBRID / BATTERY CONTROL  HYBRID CONTROL SYSTEM(for NICKEL METAL HYDRIDE BATTERY)  P1AC000  Hybrid/EV Battery Cell Low Voltage  


DESCRIPTION

The hybrid vehicle control ECU controls the SOC (state of charge) of the HV battery at a constant level during driving. The HV battery is composed of 28 modules, and each module consists of six 1.2 V cells in series. The battery voltage sensor monitors battery block voltage at 9 locations.

A369302E04
2.042,6.958 2.552,7.229 0.51,0.271 10 false VB1 2.042,6.427 2.583,6.771 0.542,0.344 10 false VB2 2.021,2.688 2.573,3.083 0.552,0.396 10 false VB10 2.052,3.646 2.594,3.979 0.542,0.333 10 false VB8 2.042,5.5 2.594,6.052 0.552,0.552 10 false VB4 2.042,1.75 2.604,2.177 0.563,0.427 10 false VB12 2.052,4.583 2.625,4.958 0.573,0.375 10 false VB6 2.031,1.229 2.635,1.583 0.604,0.354 10 false VB13 2.021,0.688 2.563,1.021 0.542,0.333 10 false VB14 2.615,0.979 4.208,1.469 1.594,0.49 10 false Connected to circuit B 2.635,1.5 4.229,1.99 1.594,0.49 10 false Connected to circuit A 2.635,2.24 4.229,2.729 1.594,0.49 10 false Connected to circuit C 2.635,3.188 4.229,3.677 1.594,0.49 10 false Connected to circuit C 2.625,4.125 4.104,4.375 1.479,0.25 10 false Connected to circuit C 2.635,5.052 4.229,5.542 1.594,0.49 10 false Connected to circuit C 2.635,6.719 4.229,7.208 1.594,0.49 10 false Connected to circuit B 2.635,5.99 4.229,6.479 1.594,0.49 10 false Connected to circuit C 2.625,7.24 4.219,7.729 1.594,0.49 10 false Connected to circuit A 4.01,3.75 4.625,4.344 0.615,0.594 10 false Circuit A 4.01,4.313 4.625,4.906 0.615,0.594 10 false Circuit B 4.021,5.167 4.635,5.76 0.615,0.594 10 false Circuit C 5.781,5.563 6.917,6.24 1.135,0.677 10 false Analogue/Digital 5.781,5.729 6.917,6.406 1.135,0.677 10 false Converter Circuit 1.813,7.865 4.021,8.365 2.208,0.5 10 false Voltage Detection Relay Circuit 2.052,8.396 3.615,8.76 1.563,0.365 10 false Battery Voltage Sensor 2.031,7.5 2.542,7.771 0.51,0.271 10 false GB0 0.135,7.354 1.177,7.948 1.042,0.594 10 false Block 1 Voltage 0.135,6.833 1.177,7.427 1.042,0.594 10 false Block 2 Voltage 0.156,6.146 1.198,6.74 1.042,0.594 10 false Block 3 Voltage 0.167,5.167 1.208,5.76 1.042,0.594 10 false Block 4 Voltage 0.135,4.26 1.177,4.854 1.042,0.594 10 false Block 5 Voltage 0.167,3.271 1.208,3.865 1.042,0.594 10 false Block 6 Voltage 0.146,2.396 1.188,2.99 1.042,0.594 10 false Block 7 Voltage 0.146,1.688 1.135,2.313 0.99,0.625 10 false Block 8 Voltage 0.146,0.969 1.292,1.646 1.146,0.677 10 false Block 9 Voltage 0.156,0.802 1.302,1.479 1.146,0.677 10 false Hybrid Battery 0.156,1.51 1.302,2.188 1.146,0.677 10 false Hybrid Battery 0.167,3.094 1.313,3.771 1.146,0.677 10 false Hybrid Battery 0.156,2.219 1.302,2.896 1.146,0.677 10 false Hybrid Battery 0.135,4.094 1.281,4.771 1.146,0.677 10 false Hybrid Battery 0.156,5.031 1.302,5.708 1.146,0.677 10 false Hybrid Battery 0.156,5.979 1.302,6.656 1.146,0.677 10 false Hybrid Battery 0.135,6.667 1.281,7.344 1.146,0.677 10 false Hybrid Battery 0.135,7.188 1.281,7.865 1.146,0.677 10 false Hybrid Battery

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P1AC000 Hybrid/EV Battery Cell Low Voltage Voltage difference between battery blocks is larger than the specified value due to an internal malfunction of the HV battery.
(2 trip detection logic)
·

Battery voltage sensor

·

HV battery

·

Hybrid battery terminal block


Comes on Master Warning:
Comes on

Related Data List
DTC No. Data List
P1AC000
·

Hybrid Battery Block 1 to 9 Voltage*1

·

Hybrid Battery SOC



HINT:
·

*1: Under normal conditions, the values of Hybrid Battery Block 1, 2, 8 and 9 Voltage will be approximately 16 V and Hybrid Battery Block 3, 4, 5, 6 and 7 Voltage will be approximately 32 V.

·

If there is a short or open in a battery block voltage detection line, the value of Hybrid Battery Block Voltage for the corresponding battery block will be lower than 8 V.



The following items can be helpful when performing repairs:

Data List
·

Internal Resistance 1 to 9

·

Ready Signal

·

Vehicle Speed

·

Accelerator Position

·

Shift Position

·

Engine Speed

·

Hybrid Battery Voltage

·

Hybrid Battery Current

·

BATT Voltage

·

Hybrid Battery SOC just after IG-ON

·

Hybrid Battery Maximum SOC

·

Hybrid Battery Minimum SOC

·

Total Distance Traveled

·

Distance from DTC Cleared

·

Engine Run Time


Vehicle Control History Data

Hybrid Battery Voltage Low


HINT:
·

This DTC can be stored after clearing DTCs and driving the vehicle for approximately 10 minutes. (As 2 trip detection logic is used, check for DTCs including pending DTCs.)

·

DTC P1AC000 is stored when a malfunction is detected in the HV battery or battery voltage sensor. If the HV battery is malfunctioning, the malfunction may not be reproduced when the condition of the HV battery changes due to a difference in driving load (amperage), battery SOC and battery temperature. Therefore, use the freeze frame data when performing a repair.

(a)

When the HV battery is malfunctioning:

- Voltage of 1 or few battery blocks has dropped. The difference of voltage value between the hybrid battery block 1 and 2, 3 and 4, 4 and 5, 5 and 6, 6 and 7 or 8 and 9 is 1.2 V or more.

- Voltage of all battery blocks is output randomly with no certain pattern.


(b)

When the battery voltage sensor is malfunctioning:

- Differences in battery block voltages have a certain pattern.



·

In order to ensure HV battery performance, appropriate cooling performance must be maintained. Perform the following items as necessary. If cooling performance has decreased and "Hybrid Battery Cooling Warning" is displayed on the multi-information display, make sure to perform the following items:

-

Make sure the air intake port is not blocked.

-

Make sure there are no gaps between the connecting parts of the ducts.

-

Clean the No. 1 HV battery intake filter.

Clear the DTCs to reset the learning values even if no DTCs are stored.





CONFIRMATION DRIVING PATTERN

HINT:

After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.

Click hereEngine / Hybrid System>2ZR-FXE (HYBRID / BATTERY CONTROL)>HYBRID CONTROL SYSTEM (for NICKEL METAL HYDRIDE BATTERY)>UTILITY


1.

Connect the GTS to the DLC3.

2.

Turn the power switch on (IG) and turn the GTS on.

3.

Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

4.

Turn the power switch off and wait for 2 minutes or more.

5.

Turn the power switch on (IG) and turn the GTS on.

6.

Drive the vehicle on urban roads for approximately 10 minutes.

HINT:

This DTC may not be stored if the vehicle is stopped or being driven at a constant speed.


7.

Enter the following menus: Powertrain / Hybrid Control / Utility / All Readiness.

8.

Check the DTC judgment result.

HINT:
·

If the judgment result shows NORMAL, the system is normal.

·

If the judgment result shows ABNORMAL, the system has a malfunction.

·

If the judgment result shows INCOMPLETE or N/A, perform driving pattern again.




CAUTION / NOTICE / HINT

CAUTION:
·
A358021C02
0.531,4.146 0.844,4.344 0.313,0.198 10 false *a 2.74,4.146 3.052,4.344 0.313,0.198 10 false *b
*a Dealer
*b Battery Collection Agent


When disposing of an HV battery, make sure to return it through an authorized collection agent who is capable of handling it safely. If the HV battery is returned via the manufacturer specified route, it will be returned properly and in a safe manner by an authorized collection agent.

-

Accidents such as electric shock may result if the HV battery is disposed of improperly or abandoned. Therefore, make sure to return all HV batteries through an authorized collection agent.



·
A358020

After removing the HV battery, keep it away from water. Exposure to water may cause the HV battery to produce heat, resulting in a fire.



PROCEDURE

1.CHECK DTC OUTPUT (HYBRID CONTROL)
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.


d.

Check for DTCs.

Powertrain > Hybrid Control > Trouble Codes
50001 397

Result:
Result Proceed to
P0AFC00, P0AFC96, P308A12 or P0AFC62 is not output. A
P0AFC00, P0AFC96, P308A12 or P0AFC62 is also output. B


e.

Turn the power switch off.



A

2.CHECK FREEZE FRAME DATA

B

2.CHECK FREEZE FRAME DATA
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.


d.

Read output DTCs.

Powertrain > Hybrid Control > Trouble Codes
50001 397

e.

Using the GTS, make a note of the freeze frame data item "Hybrid Battery Block (3 to 7) Voltage".


f.

Compare the freeze frame data item "Hybrid Battery Block (3 to 7) Voltage" values with those shown in the following combination tables.

Condition
"Hybrid Battery Block 3 Voltage" - "Hybrid Battery Block 4 Voltage" = 1.2 V or more
"Hybrid Battery Block 4 Voltage" - "Hybrid Battery Block 3 Voltage" = 1.2 V or more
"Hybrid Battery Block 4 Voltage" - "Hybrid Battery Block 5 Voltage" = 1.2 V or more
"Hybrid Battery Block 5 Voltage" - "Hybrid Battery Block 4 Voltage" = 1.2 V or more
"Hybrid Battery Block 5 Voltage" - "Hybrid Battery Block 6 Voltage" = 1.2 V or more
"Hybrid Battery Block 6 Voltage" - "Hybrid Battery Block 5 Voltage" = 1.2 V or more
"Hybrid Battery Block 6 Voltage" - "Hybrid Battery Block 7 Voltage" = 1.2 V or more
"Hybrid Battery Block 7 Voltage" - "Hybrid Battery Block 6 Voltage" = 1.2 V or more

A380244C03
4.833,1.844 5.271,2.052 5.271,2.052 5.5,2.052 false 1.552,3.375 1.99,3.635 0.438,0.26 10 false *a 1.823,3.375 2.219,3.656 0.396,0.281 10 false *b 2.583,3.385 3.021,3.729 0.438,0.344 10 false *c 3.063,3.406 3.542,3.74 0.479,0.333 10 false *d 3.531,3.406 4.052,3.698 0.521,0.292 10 false *e 4,3.396 4.375,3.635 0.375,0.24 10 false *f 4.458,3.396 4.844,3.635 0.385,0.24 10 false *g 5.01,3.417 5.406,3.646 0.396,0.229 10 false *h 5.313,3.427 5.667,3.646 0.354,0.219 10 false *i 1.594,3.542 1.906,3.74 0.313,0.198 10 false A 1.875,3.552 2.188,3.75 0.313,0.198 10 false B 2.635,3.552 2.948,3.75 0.313,0.198 10 false C 3.094,3.563 3.406,3.76 0.313,0.198 10 false C 3.573,3.573 3.885,3.771 0.313,0.198 10 false C 4.021,3.563 4.333,3.76 0.313,0.198 10 false C 4.5,3.563 4.792,3.75 0.292,0.188 10 false C 5.063,3.573 5.375,3.771 0.313,0.198 10 false A 5.344,3.573 5.677,3.781 0.333,0.208 10 false B 0.083,0.052 2.302,0.344 2.219,0.292 10 false Check for HV Battery Malfunction 4.927,0.375 7.073,0.719 2.146,0.344 10 false B: Circuit B Battery Block Voltage 4.927,0.073 7.115,0.333 2.188,0.26 10 false A: Circuit A Battery Block Voltage 4.927,0.719 7.104,1.052 2.177,0.333 10 false C: Circuit C Battery Block Voltage 5.542,1.958 6.542,2.458 1,0.5 10 false 1.2 V or more 0.083,0.427 3.49,1.167 3.406,0.74 10 false (Example for when the difference of voltage value occurs between the hybrid battery block 6 and 7)
*a Hybrid Battery Block 1 Voltage *b Hybrid Battery Block 2 Voltage
*c Hybrid Battery Block 3 Voltage *d Hybrid Battery Block 4 Voltage
*e Hybrid Battery Block 5 Voltage *f Hybrid Battery Block 6 Voltage
*g Hybrid Battery Block 7 Voltage *h Hybrid Battery Block 8 Voltage
*i Hybrid Battery Block 9 Voltage - -


Result:
Result Proceed to
On the HV battery blocks 3 to 7, one of the conditions in the table above is met. A
Other than above B



g.

Turn the power switch off.



A

3.CHECK TOTAL DISTANCE DRIVEN

B

5.CHECK FREEZE FRAME DATA
3.CHECK TOTAL DISTANCE DRIVEN
a.

Read the odometer to check the total distance the vehicle has been driven.

Result:
Result Proceed to
Total distance driven is less than 200000 km (124280 mile) A
Total distance driven is 200000 km (124280 mile) or more Current total distance driven - total distance driven when hybrid battery terminal block replaced = less than 200000 km (124280 mile) *1
Other than above B


HINT:

*1: If the hybrid battery terminal block has been replaced, use the total distance driven since it was replaced.




A

B

4.REPLACE HV BATTERY
5.CHECK FREEZE FRAME DATA
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.


d.

Read output DTCs.

Powertrain > Hybrid Control > Trouble Codes
50001 397

e.

Using the GTS, make a note of the freeze frame data item "Hybrid Battery Block 1, 2, 8 and 9 Voltage".


f.

Compare the freeze frame data item "Hybrid Battery Block 1, 2, 8 and 9 Voltage" values with those shown in the following combination tables.

Table 1
Circuit A Battery Block Circuit B Battery Block Condition
Hybrid Battery Block 1 Voltage Hybrid Battery Block 2 Voltage "Hybrid Battery Block 1 Voltage" - "Hybrid Battery Block 2 Voltage" = 1.2 V or more
Hybrid Battery Block 8 Voltage Hybrid Battery Block 9 Voltage "Hybrid Battery Block 8 Voltage" - "Hybrid Battery Block 9 Voltage" = 1.2 V or more

Table 2
Circuit A Battery Block Circuit B Battery Block Condition
Hybrid Battery Block 1 Voltage Hybrid Battery Block 2 Voltage "Hybrid Battery Block 2 Voltage" - "Hybrid Battery Block 1 Voltage" = 1.2 V or more
Hybrid Battery Block 8 Voltage Hybrid Battery Block 9 Voltage "Hybrid Battery Block 9 Voltage" - "Hybrid Battery Block 8 Voltage" = 1.2 V or more

A380245C04
2.021,1.854 2.333,0.823 2.333,0.823 2.479,0.823 false 5.5,1.875 5.667,1.563 5.667,1.563 5.865,1.563 false 1.948,4.573 2.438,3.458 2.438,3.458 2.677,3.458 false 5.49,4.552 5.656,4.24 5.656,4.24 5.854,4.24 false 1.333,2.688 1.677,2.99 0.344,0.302 10 false *a 1.646,2.698 2.146,3.021 0.5,0.323 10 false *b 2.427,2.708 3.052,3.073 0.625,0.365 10 false *c 2.885,2.719 3.396,3 0.51,0.281 10 false *d 3.365,2.719 3.833,3.125 0.469,0.406 10 false *e 3.833,2.74 4.531,3.198 0.698,0.458 10 false *f 4.302,2.719 4.896,3.146 0.594,0.427 10 false *g 4.854,2.74 5.323,3.177 0.469,0.438 10 false *h 5.167,2.75 5.667,3.104 0.5,0.354 10 false *i 1.271,5.375 1.615,5.677 0.344,0.302 10 false *a 1.583,5.375 2.083,5.698 0.5,0.323 10 false *b 2.406,5.375 3.031,5.74 0.625,0.365 10 false *c 2.865,5.385 3.375,5.667 0.51,0.281 10 false *d 3.344,5.375 3.813,5.781 0.469,0.406 10 false *e 3.813,5.396 4.344,5.677 0.531,0.281 10 false *f 4.313,5.375 4.802,5.646 0.49,0.271 10 false *g 4.833,5.385 5.219,5.635 0.385,0.25 10 false *h 5.177,5.385 5.604,5.656 0.427,0.271 10 false *i 1.375,2.896 1.719,3.198 0.344,0.302 10 false A 1.688,2.896 2.031,3.198 0.344,0.302 10 false B 2.479,2.896 2.823,3.198 0.344,0.302 10 false C 2.917,2.896 3.26,3.198 0.344,0.302 10 false C 3.417,2.896 3.76,3.198 0.344,0.302 10 false C 3.854,2.906 4.198,3.208 0.344,0.302 10 false C 4.333,2.906 4.677,3.208 0.344,0.302 10 false C 4.896,2.906 5.24,3.208 0.344,0.302 10 false A 5.208,2.906 5.552,3.208 0.344,0.302 10 false B 1.323,5.583 1.635,5.813 0.313,0.229 10 false A 1.625,5.583 1.969,5.813 0.344,0.229 10 false B 2.438,5.542 2.75,5.781 0.313,0.24 10 false C 2.896,5.552 3.188,5.75 0.292,0.198 10 false C 3.385,5.563 3.677,5.76 0.292,0.198 10 false C 3.833,5.563 4.125,5.76 0.292,0.198 10 false C 4.333,5.563 4.625,5.76 0.292,0.198 10 false C 4.885,5.573 5.219,5.802 0.333,0.229 10 false A 5.219,5.573 5.552,5.792 0.333,0.219 10 false B 2.542,0.719 3.521,1.042 0.979,0.323 10 false 1.2 V or more 0.281,0.427 2.438,0.917 2.156,0.49 10 false All conditions in table 1 are met. 0.333,3.177 2.49,3.667 2.156,0.49 10 false All conditions in table 2 are met. 4.958,0.052 7.083,0.563 2.125,0.51 10 false A: Circuit A Battery Block Voltage 4.958,0.385 7.073,0.896 2.115,0.51 10 false B: Circuit B Battery Block Voltage 4.969,0.729 7.125,1.281 2.156,0.552 10 false C: Circuit C Battery Block Voltage 0.115,0.042 2.885,0.313 2.771,0.271 10 false Check for Battery Voltage Sensor Malfunction 5.927,1.479 6.906,1.802 0.979,0.323 10 false 1.2 V or more 2.719,3.354 3.698,3.677 0.979,0.323 10 false 1.2 V or more 5.906,4.135 6.885,4.458 0.979,0.323 10 false 1.2 V or more
*a Hybrid Battery Block 1 Voltage *b Hybrid Battery Block 2 Voltage
*c Hybrid Battery Block 3 Voltage *d Hybrid Battery Block 4 Voltage
*e Hybrid Battery Block 5 Voltage *f Hybrid Battery Block 6 Voltage
*g Hybrid Battery Block 7 Voltage *h Hybrid Battery Block 8 Voltage
*i Hybrid Battery Block 9 Voltage - -


HINT:

If an internal malfunction occurs in the battery voltage sensor, this symptom (difference in voltage of 1.2 V or more for certain pairs of blocks as shown in the illustration) will occur.


Result:
Result Proceed to
Either of the following conditions is met:
1. All conditions in table 1 are met.
2. All conditions in table 2 are met.
A
Other than above B



g.

Turn the power switch off.



A

B

6.CHECK TOTAL DISTANCE DRIVEN
6.CHECK TOTAL DISTANCE DRIVEN
a.

Read the odometer to check the total distance the vehicle has been driven.

Result:
Result Proceed to
Total distance driven is less than 200000 km (124280 mile) A
Total distance driven is 200000 km (124280 mile) or more Current total distance driven - total distance driven when hybrid battery terminal block replaced = less than 200000 km (124280 mile) *1
Other than above B


HINT:

*1: If the hybrid battery terminal block has been replaced, use the total distance driven since it was replaced.




A

B

7.REPLACE HV BATTERY