53111
1.INSTALL RADIATOR GRILLE
Engage the claws to install the radiator grille.
Install the 2 bolts.
w/o Panoramic View Monitor System:
Engage the wire harness clamp.
w/ Panoramic View Monitor System:
Engage the wire harness clamps.
88211B
2.INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Toyota Safety Sense)
3.INSTALL FRONT BUMPER ASSEMBLY (w/o Toyota Safety Sense)
4.PERFORM CALIBRATION
Parking support brake system and Simple intelligent parking assist system:
Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PARKING SUPPORT BRAKE SYSTEM>CALIBRATION
Panoramic view monitor system:
Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>CALIBRATION
5.ADJUST MILLIMETER WAVE RADAR SENSOR (w/ Toyota Safety Sense)
When the millimeter wave radar sensor assembly or No. 1 millimeter wave radar sensor bracket is replaced with a new one, adjustment of the radar sensor beam axis must be performed.
Click hereEngine / Hybrid System>CRUISE CONTROL>MILLIMETER WAVE RADAR SENSOR>ADJUSTMENT