Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (for Manual Seat) › from 2019.09
RM32K0E _58 Vehicle Interior _061825 SEAT _0404433 FRONT SEAT ASSEMBLY(for Manual Seat) A

SEAT  FRONT SEAT ASSEMBLY(for Manual Seat)  REASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:
·
B458500

Be sure to read Precaution thoroughly before servicing.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION

·
B407261

Wear protective gloves. Sharp areas on the parts may injure your hands.



HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

Use the same procedure for the driver side and front passenger side.

·

The procedure listed below is for the driver side.



PROCEDURE

Hide 72443B 1.INSTALL VERTICAL ADJUSTER GEAR (w/ Vertical Adjuster)

a.

Install the vertical adjuster gear.

i.
B456120

Install the front vertical adjuster brake sub-assembly.

NOTICE:

Make sure to insert the stud bolt of the front vertical adjuster brake sub-assembly into the hole of the front seat adjuster assembly as shown in the illustration.



ii.
B456118

Install the vertical adjuster spacer.


iii.
B456117N01
2.615,0.667 2.771,0.865 0.156,0.198 10 true 1 0.979,0.74 1.135,0.938 0.156,0.198 10 true 2 2.688,1.323 2.844,1.521 0.156,0.198 10 true 3

Install the vertical adjuster plate with the 3 nuts.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)

NOTICE:

Tighten the nuts in the order shown in the illustration.




Hide 72125A 2.INSTALL REAR UPPER SEAT TRACK COVER

HINT:

Use the same procedure for both sides.


a.
B503579C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws to install the rear upper seat track cover as shown in the illustration.


Hide 72266 3.INSTALL SEAT TRACK UPPER RAIL COVER

HINT:

Use the same procedure for both sides.


a.
B501303C02
0,0 0,0 false
V113147

Install in this Direction


Engage the claws to install the seat track upper rail cover as shown in the illustration.


Hide 82821A 4.INSTALL CONNECTOR COVER (w/o Seat Heater System)

a.
B458521

Engage the claw to install the connector cover.


Hide 82667B 5.INSTALL CONNECTOR HOLDER (for Front Passenger Side)

a.
B458525

Engage the claw to install the connector holder.


Hide 72211C 6.INSTALL SEAT TRACK ADJUSTING HANDLE

a.
B453968

Engage the claws to install the seat track adjusting handle to the front seat adjuster assembly.


Hide 71052A 7.INSTALL FRONT SEAT CUSHION SPRING SUB-ASSEMBLY

a.
B453967

Engage the hooks to install the front seat cushion spring sub-assembly to the front seat adjuster assembly.


Hide 7181B 8.INSTALL FRONT SEAT CUSHION WIRE HARNESS HOLDER

a.
B453966

Engage the claw to install the front seat cushion wire harness holder.


b.

Install the 2 screws.


Hide 82192 9.INSTALL FRONT SEAT WIRE (for Driver Side)

a.
B453965

Engage the claw.


b.

Disengage the clamps to install the front seat wire.


Hide 82191 10.INSTALL FRONT SEAT WIRE (for Front Passenger Side)

a.
B458520

Engage the claw.


b.

Disengage the clamps to install the front seat wire.


Hide 8219A 11.INSTALL NO. 2 FRONT SEAT WIRE (w/ Seat Position Airbag Sensor)

a.
B458493

Engage the claw and clamp to install the No. 2 front seat wire.


Hide 71875G 12.INSTALL RECLINING ADJUSTER INSIDE COVER RH (w/ Vertical Adjuster)

a.
B453962

Engage the claws to install the reclining adjuster inside cover RH.


Hide 71876G 13.INSTALL RECLINING ADJUSTER INSIDE COVER LH (w/ Vertical Adjuster)

a.
B453961

Engage the claws to install the reclining adjuster inside cover LH.


b.
B453960

w/ Lumbar Support:

i.

Engage the claw.



Hide 71875F 14.INSTALL RECLINING ADJUSTER INSIDE COVER RH (w/o Vertical Adjuster)

a.
B453964

Engage the claws to install the reclining adjuster inside cover RH.


Hide 71876F 15.INSTALL RECLINING ADJUSTER INSIDE COVER LH (w/o Vertical Adjuster)

a.
B453963

Engage the claws to install the reclining adjuster inside cover LH.


Hide 71873A 16.INSTALL FRONT SEAT LOWER CUSHION SHIELD (w/ Vertical Adjuster)

a.
B453959C02
2.344,0.5 3.094,0.5 true 1.99,1.542 2.74,1.542 true 3.146,0.396 3.344,0.646 0.198,0.25 10 false *a 2.792,1.417 2.99,1.667 0.198,0.25 10 false *b
*a Hook
*b Guide


Engage the claw and guide.


b.

Engage the hook to install the front seat lower cushion shield.


Hide 71874A 17.INSTALL FRONT SEAT LOWER CUSHION SHIELD LH (w/ Vertical Adjuster)

a.
B453958C03
2.333,0.698 3.063,0.698 true 1.906,1.49 2.635,1.49 true 3.115,0.573 3.365,0.823 0.25,0.25 10 false *a 2.698,1.385 3.01,1.583 0.313,0.198 10 false *b
*a Hook
*b Guide


Engage the claw and guide.


b.

Engage the hook to install the front seat lower cushion shield LH.


Hide 87510L 18.INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)

Hide 71072S 19.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER

NOTICE:

When installing a separate type front seat cushion cover, refer to Precaution in order to prevent wrinkles from forming.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>PRECAUTION


a.
B458475

Engage the claws to install the separate type front seat cushion cover to the separate type front seat cushion pad.

NOTICE:

Be careful not to damage the separate type front seat cushion cover.



Hide 20.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

a.

Engage the hooks (A) and hooks (B) to install the separate type front seat cushion cover with pad.

B453956E01
3.104,0.594 3.521,0.177 true 3.948,0.594 3.531,0.177 true 0.802,1.198 1.271,0.896 true 0.813,1.208 1.25,1.625 true 0.802,1.24 1.26,2.323 true 3.229,2.25 3.5,2.573 true 3.823,2.26 3.51,2.573 true 5.74,0.948 6.375,1.271 true 5.74,1.594 6.375,1.281 true 5.75,1.948 6.396,1.281 true 3.448,0.031 3.74,0.219 0.292,0.188 10 false (A) 0.531,1.115 0.781,1.271 0.25,0.156 10 true (B) 3.417,2.583 3.698,2.75 0.281,0.167 10 false (B) 6.417,1.219 6.708,1.406 0.292,0.188 10 true (B)


b.
B453955

Engage the hooks.


c.

for Front Passenger Side:

i.
B475983

Engage the claw to install the occupant detection sensor connector.



d.

w/ Seat Heater System:

i.

Connect the connector.


ii.
B453954

Engage the clamp.



Hide 8219B 21.INSTALL NO. 2 FRONT SEAT WIRE (w/ Lumbar Support)

a.
B453953

Engage the clamp to install the No. 2 front seat wire.


Hide 71759B 22.INSTALL FRONT SEATBACK HOOK

a.
B453952

Engage the claws to install the 2 front seatback hooks from the front seatback frame sub-assembly.


Hide 71054S 23.INSTALL FRONT SEATBACK SPRING SUB-ASSEMBLY (w/o Lumbar Support)

a.
B458494

Install the 2 front seatback edge protectors to the front seatback spring sub-assembly.


b.
B458477C01
0,0 0,0 false
V113147

Install in this Direction


Engage the guides to install the front seatback spring sub-assembly to the front seatback frame sub-assembly as shown in the illustration.


c.
B453950

Engage the claws to install the 2 front seatback edge protectors to the front seatback frame sub-assembly.


Hide 79977A 24.INSTALL SEATBACK FELT (w/ Lumbar Support)

Hide 72760D 25.INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY (w/ Lumbar Support)

Hide 87510N 27.INSTALL FRONT SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)

Hide 71074S 28.INSTALL SEPARATE TYPE FRONT SEATBACK COVER

NOTICE:

When installing a separate type front seatback cover, refer to Precaution in order to prevent wrinkles from forming.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>PRECAUTION


a.
B458476

Engage the claws to install the separate type front seatback cover to the separate type front seatback pad.

NOTICE:

Be careful not to damage the separate type front seatback cover.



Hide 29.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

a.

Install the separate type front seatback cover with pad to the separate type front seatback spring assembly.


Hide 71931 30.INSTALL FRONT SEAT HEADREST SUPPORT

a.
B458474C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws to install the 2 front seat headrest supports as shown in the illustration.


b.
B458473

Close the 2 fasteners as shown in the illustration.


c.

w/ Seat Heater System:

i.
B453946

Engage the clamp.



d.
B453945

Engage the hooks.


Hide 31.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY

a.
B453944

Engage the guides to install the separate type front seatback assembly to the separate type front seat cushion assembly.


b.

Install the 4 bolts.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


c.
B453943

Engage the claw and clamps to install the front seat airbag assembly wire harness.

HINT:

Engage the claw first.



d.

w/ Seat Heater System:

i.
B453942

Engage the clamp.


ii.

Connect the connector.



e.

w/ Lumbar Support:

i.
B453941

Engage the clamp.


ii.

Connect the connector.



f.
B453940

Engage the hooks.


g.
B563657

Engage the hook.


Hide 72498A 32.INSTALL VERTICAL ADJUSTER BRACKET COVER (w/ Vertical Adjuster)

a.
B453939

Engage the claw to install the vertical adjuster bracket cover.


Hide 71862 33.INSTALL FRONT SEAT INNER CUSHION SHIELD (for Driver Side)

a.
B458470C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws and guides as shown in the illustration.


b.
B458497C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws to install the front seat inner cushion shield as shown in the illustration.


Hide 84922A 34.INSTALL FRONT LUMBAR POWER SEAT SWITCH (w/ Lumbar Support)

Hide 71812D 35.INSTALL FRONT SEAT CUSHION SHIELD (for Driver Side)

a.
B453932

w/ Lumbar Support:

i.

Connect the connector.


ii.

Engage the clamps.



b.
B458469C01
0.271,1.333 0.854,1.333 true 1.333,0.167 2.5,0.167 true 1.802,0.167 1.802,0.583 1.802,0.583 2.219,0.583 true 0.021,1.25 0.25,1.458 0.229,0.208 10 true (A) 1,0.083 1.24,0.271 0.24,0.188 10 true (B)
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Engage the guide (A) as shown in the illustration.


c.

Engage the claws and guides (B) as shown in the illustration.


d.
B458496C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws to install the front seat cushion shield as shown in the illustration.


Hide 71861 36.INSTALL FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)

a.
B458472C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws and guides as shown in the illustration.


b.
B458499C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws to install the front seat inner cushion shield as shown in the illustration.


Hide 71811D 37.INSTALL FRONT SEAT CUSHION SHIELD (for Front Passenger Side)

a.

w/ Vertical Adjuster:

i.
B460448C05
0.917,0.219 1.5,0.219 true 1.208,0.583 1.333,0.583 1.333,0.583 1.333,0.229 true 2.573,1.354 2.906,1.354 true 1.51,0.167 1.708,0.333 0.198,0.167 10 true (B) 2.938,1.281 3.156,1.479 0.219,0.198 10 true (A)
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Engage the guide (A) as shown in the illustration.


ii.

Engage the claws and guides (B) as shown in the illustration.



b.

w/o Vertical Adjuster:

i.
B458471C01
2.76,1.167 3.094,1.167 true 0.74,0.167 1.917,0.167 true 0.885,0.333 1.417,0.333 1.417,0.333 1.417,0.167 true 1.99,0.083 2.229,0.292 0.24,0.208 10 true (B) 3.167,1.073 3.385,1.271 0.219,0.198 10 true (A)
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Engage the guide (A) as shown in the illustration.


ii.

Engage the claws and guides (B) as shown in the illustration.



c.
B458498C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws to install the front seat cushion shield as shown in the illustration.


Hide 71849F 38.INSTALL SEAT ADJUSTER COVER CAP (w/ Vertical Adjuster)

a.
B458468C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Engage the guides as shown in the illustration.


b.

Engage the claws to install the seat adjuster cover cap as shown in the illustration.


Hide 72526A 39.INSTALL RECLINING ADJUSTER RELEASE HANDLE

a.
B453928

Engage the guide to install the reclining adjuster release handle.


Hide 72538 40.INSTALL RECLINING HINGE OUTER COVER

a.
B458467C01
0,0 0,0 false
V113147

Install in this Direction


Engage the guide and claw to install the reclining hinge outer cover as shown in the illustration.


Hide 72495 41.INSTALL VERTICAL ADJUSTING HANDLE (w/ Vertical Adjuster)

a.
B458466C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claw to install the vertical adjusting handle as shown in the illustration.


Hide 71074S 42.CONNECT SEPARATE TYPE FRONT SEATBACK COVER

a.
B453925

Connect the rubber band of the separate type front seatback cover.


Hide 73240 43.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

Hide 73230 44.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

Hide 87501B 45.INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)

Hide 89178A 46.INSTALL SEAT POSITION AIRBAG SENSOR (w/ Seat Position Airbag Sensor)

Hide 72277A 47.INSTALL SEAT SLIDE POSITION SENSOR PROTECTOR (w/ Seat Position Airbag Sensor)