G3830A
1.INSTALL ELECTRIC VEHICLE BATTERY PLUG ASSEMBLY
Be sure to wear insulated gloves and protective goggles.
Install the electric vehicle battery plug assembly to the HV battery with the bolt.
Connect the hybrid battery terminal block connector.
Make sure that the connector is connected securely.
Connect the HV battery junction block assembly connector.
Make sure that the connector is connected securely.
Engage the 2 claws to close the wiring harness protector.
Connect the electric vehicle battery plug assembly connector.
G920L
2.INSTALL UPPER NO. 1 HYBRID BATTERY COVER SUB-ASSEMBLY
G92PF
3.INSTALL NO. 4 HV BATTERY PROTECTOR
82161
4.CONNECT FLOOR WIRE
821H1
5.CONNECT FLOOR UNDER WIRE
G92N4A
6.INSTALL NO. 1 HV BATTERY COVER PANEL RH
71033
7.INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY
76971G
8.INSTALL REAR UNDER COVER
76974F
9.INSTALL REAR UNDER SIDE COVER LH
67918A
10.INSTALL REAR DOOR SCUFF PLATE LH
76973F
11.INSTALL REAR UNDER SIDE COVER RH
Use the same procedure as for the LH side.
67917A
12.INSTALL REAR DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
72693
13.INSTALL REAR SEAT CUSHION LOCK HOOK
14.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY
G3834
15.INSTALL SERVICE PLUG GRIP
16.PERFORM INITIALIZATION