Home › Engine / Hybrid System › 8NR-FTS (INTAKE / EXHAUST) › INTERCOOLER
RM32H0E _51 Engine / Hybrid System _059908 8NR-FTS INTAKE / EXHAUST _0293888 INTERCOOLER A

8NR-FTS INTAKE / EXHAUST  INTERCOOLER  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 2.DRAIN COOLANT (for Intercooler)

Hide 16551C 4.DISCONNECT NO. 1 INTERCOOLER COOLING WATER HOSE

a.
A392856

Slide the clip and disconnect the No. 1 intercooler cooling water hose from the intercooler assembly.


Hide 16554C 5.DISCONNECT NO. 4 INTERCOOLER COOLING WATER HOSE

a.
A392857

Slide the clip and disconnect the No. 4 intercooler cooling water hose from the intercooler assembly.


Hide 6.REMOVE INTERCOOLER ASSEMBLY

a.
A394549

Remove the 2 bolts and 2 nuts and disconnect the intercooler assembly from the throttle body with motor assembly.


b.
A392858

Slide the 2 clips and disconnect the 2 No. 1 turbo water hoses from the intercooler assembly.


c.
A353271

Remove the 2 bolts and disconnect the No. 2 turbo water pipe sub-assembly from the intercooler assembly.


d.
A353270

Loosen the hose clamp and remove the intercooler assembly from the air tube assembly and throttle body with motor assembly.


e.
A351379

Remove the throttle body gasket from the intercooler assembly.