Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System) › 2016.10–2019.09
RM32H0E _58 Vehicle Interior _059647 DOOR LOCK _0294251 WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System) J

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System)  No Answer-Back  


DESCRIPTION

In some cases, wireless door lock control functions are normal but the hazard warning light answer-back function does not operate. In such cases, hazard warning light signal outputs from the main body ECU (multiplex network body ECU) may be malfunctioning.

WIRING DIAGRAM

E358358E01
5.313,3.365 6.979,3.979 1.667,0.615 10 false Main Body ECU (Multiplex Network Body ECU) 2.844,3.323 4.74,3.552 1.896,0.229 10 false Combination Meter Assembly 1.083,2.385 2.521,2.927 1.438,0.542 10 false Hazard Warning Signal Switch Assembly 0.76,4.167 2.656,4.396 1.896,0.229 10 false : CAN Communication Line 1.094,2.229 1.469,2.406 0.375,0.177 10 false F62 2.865,3.156 3.24,3.333 0.375,0.177 10 false F5 3.313,1.823 3.688,2 0.375,0.177 10 false HAZ 3.802,1.927 4.177,2.104 0.375,0.177 10 false IC 1.99,1.833 2.365,2.01 0.375,0.177 10 false TB 1.333,1.833 1.563,2.01 0.229,0.177 10 false E 1.125,1.823 1.323,2 0.198,0.177 10 false 1 2.281,1.823 2.49,2.01 0.208,0.188 10 false 4 3.115,1.823 3.302,2 0.188,0.177 10 false 3

CAUTION / NOTICE / HINT

NOTICE:

The wireless door lock control system uses the CAN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the wireless door lock control system after confirming that the communication systems are functioning properly.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System)>HOW TO PROCEED WITH TROUBLESHOOTING


PROCEDURE

1.READ VALUE USING GTS (Hazard Answer Back)
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Customize Setting / Wireless Door Lock.


e.

Select the setting by referring to the table below.

Wireless Door Lock
Tester Display Description Default Setting ECU
Hazard Answer Back When the doors are locked by wireless operation, the hazard warning lights flash once.
When the doors are unlocked by wireless operation, the hazard warning lights flash twice.
ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
50006 1

Result:
Result Proceed to
Customize setting is ON A
Customize setting is OFF B



A

2.CHECK WIRELESS DOOR LOCK CONTROL FUNCTIONS

B

2.CHECK WIRELESS DOOR LOCK CONTROL FUNCTIONS
a.

Check the wireless door lock control function using the door control transmitter assembly.


Result:
Result Proceed to
Wireless door lock/unlock operates properly. A
Wireless door lock/unlock does not operate properly. B



A

3.READ VALUE USING GTS (FR Door Lock Pos, FL Door Lock Pos, RR-Door Lock Pos SW, RL-Door Lock Pos SW)

B

3.READ VALUE USING GTS (FR Door Lock Pos, FL Door Lock Pos, RR-Door Lock Pos SW, RL-Door Lock Pos SW)
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Main Body / Data List.


e.

Read the Data List according to the display on the GTS.

Body Electrical > Main Body > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
FR Door Lock Pos Front door RH unlock detection switch signal LOCK or UNLOCK LOCK: Front door RH locked
UNLOCK: Front door RH unlocked
-
FL Door Lock Pos Front door LH unlock detection switch signal LOCK or UNLOCK LOCK: Front door LH locked
UNLOCK: Front door LH unlocked
-
RR-Door Lock Pos SW Rear door RH and LH unlock detection switch signal ON or OFF ON: Rear door RH or LH unlocked
OFF: Rear door RH and LH locked
*1
RL-Door Lock Pos SW Rear door RH and LH unlock detection switch signal ON or OFF ON: Rear door RH or LH unlocked
OFF: Rear door RH and LH locked
*2
·

*1: When checking RR-Door Lock Pos SW, make sure to check it with the rear door LH locked.

·

*2: When checking RL-Door Lock Pos SW, make sure to check it with the rear door RH locked.


Body Electrical > Main Body > Data List
Tester Display
FR Door Lock Pos
FL Door Lock Pos
RR-Door Lock Pos SW
RL-Door Lock Pos SW
50003 123 196,198,51,52

Result:
Proceed to
OK
NG



OK

4.CHECK HAZARD WARNING LIGHTS OPERATION

NG

GO TO LIGHTING SYSTEM (Proceed to Door Unlock Detection Switch Circuit)

4.CHECK HAZARD WARNING LIGHTS OPERATION
a.

Check that the hazard warning light blinks when the hazard warning signal switch is pressed.

OK:

Hazard warning light signal blinks when the hazard warning signal switch is pressed.



Result:
Result Proceed to
OK (for LHD) A
OK (for RHD) B
NG C



A

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

B

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

C

GO TO LIGHTING SYSTEM (Proceed to Hazard Warning Switch Circuit)