Home › Engine / Hybrid System › 8NR-FTS (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE (for Intake Side)
RM32H0E _51 Engine / Hybrid System _059353 8NR-FTS ENGINE CONTROL _0295062 CAMSHAFT OIL CONTROL VALVE(for Intake Side) G

8NR-FTS ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE(for Intake Side)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 15370 1.REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side)

Hide 13523F 2.INSPECT CAMSHAFT TIMING GEAR BOLT

a.
A355357C02
0.979,1.646 1.26,1.646 1.26,1.646 1.802,1.073 true 0.813,1.563 1,1.729 0.188,0.167 10 true *a
*a Plunger


Check the stroke of the plunger in the center of the camshaft timing gear bolt.

Standard Stroke:

4.5 mm (0.177 in.) or more


HINT:

When pressing the plunger, there may be a stepped feeling. This is not a malfunction.


If the result is not as specified, replace the camshaft timing gear bolt.


Hide 15370 3.INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side)