Home › Engine / Hybrid System › 8NR-FTS (ENGINE CONTROL) › ENGINE OIL TEMPERATURE SENSOR
RM32H0E _51 Engine / Hybrid System _059353 8NR-FTS ENGINE CONTROL _0295073 ENGINE OIL TEMPERATURE SENSOR A

8NR-FTS ENGINE CONTROL  ENGINE OIL TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89429F 1.INSTALL ENGINE OIL TEMPERATURE SENSOR

a.

Install a new gasket to the engine oil temperature sensor.


b.
A392723N01
1.5,0.75 1.167,0.75 true 0.844,0.656 1.24,0.844 0.396,0.188 10 true SST

Using SST, install the engine oil temperature sensor to the oil pump relief valve housing assembly.

SST
09817-33191  

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)

NOTICE:

If the engine oil temperature sensor has been struck or dropped, replace it.



c.

Connect the engine oil temperature sensor connector.


Hide 3.INSPECT FOR ENGINE OIL LEAK

Hide 51443C 4.INSTALL REAR ENGINE UNDER COVER RH

Hide 5.INSTALL FRONT WHEEL RH