87710G
1.INSTALL QUICK HEATER ASSEMBLY
|
Install in this Direction |
Install the quick heater assembly with the 2 screws as shown in the illustration.
Connect the connector.
Engage the clamp.
87114L
2.REMOVE NO. 2 HEATER COVER
Install the No. 2 heater cover with the screw.
87211
3.INSTALL NO. 1 AIR DUCT
55607
4.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
62112
5.INSTALL COWL SIDE TRIM BOARD LH
67914
6.INSTALL FRONT DOOR SCUFF PLATE LH