1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (for HFC-134a(R134a))
2.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (for HFO-1234yf(R1234yf))
51441
3.REMOVE NO. 1 ENGINE UNDER COVER
16361A
4.REMOVE FAN AND GENERATOR V BELT
88703
5.DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY
Disconnect the connector.
Remove the bolt to disconnect the discharge hose sub-assembly from the compressor with pulley assembly.
Remove the O-ring from the discharge hose sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
88704
6.DISCONNECT SUCTION HOSE SUB-ASSEMBLY
Remove the bolt to disconnect the suction hose sub-assembly from the compressor with pulley assembly.
Remove the O-ring from the suction hose sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
88310
7.REMOVE COMPRESSOR WITH PULLEY ASSEMBLY
Remove the 2 bolts and 2 nuts.
Using an E8 "TORX" socket wrench, remove the 2 stud bolts and compressor with pulley assembly.
Remove the compressor with pulley assembly from the vehicle with the stud bolts remaining in the compressor with pulley assembly.