Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio Receiver Type) › 2016.10–2019.09
RM32H0E _56 Audio / Visual / Telematics _060227 AUDIO / VIDEO _0295448 AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)  Speaker Circuit  


DESCRIPTION

If there is a short in a speaker circuit, the radio receiver assembly detects it and stops output to the speakers.

Thus sound cannot be heard from the speakers even if there is no malfunction in the radio receiver assembly, telematics transceiver* or speakers.

*: w/ Manual (SOS) Switch


WIRING DIAGRAM

for 4 Speakers


E359691E03
5.594,5.021 7.156,5.323 1.563,0.302 10 false Radio Receiver Assembly 5.594,4.823 5.906,5.354 0.313,0.531 10 false F48 5.99,0.844 6.448,1.042 0.458,0.198 10 false FR+ 5.99,1.719 6.448,1.917 0.458,0.198 10 false FR- 5.979,3.531 6.438,3.729 0.458,0.198 10 false FL+ 5.979,4.427 6.438,4.625 0.458,0.198 10 false FL- 0.083,1.729 0.396,2.26 0.313,0.531 10 false I1 4.063,2.323 5.625,2.854 1.563,0.531 10 false Telematics Transceiver 0.073,1.938 1.354,2.552 1.281,0.615 10 false Front No. 1 Speaker Assembly RH 4.073,2.146 4.385,2.677 0.313,0.531 10 false F51 1.521,2.156 1.854,2.396 0.333,0.24 10 false F85 1.51,2.375 3.719,2.646 2.208,0.271 10 false Front No. 2 Speaker Assembly RH 2.417,4.813 2.729,5.063 0.313,0.25 10 false F86 2.417,4.969 4.969,5.323 2.552,0.354 10 false Front No. 2 Speaker Assembly LH 0.25,4.031 1.479,4.771 1.229,0.74 10 false Front No. 1 Speaker Assembly LH 0.26,3.802 0.573,4.333 0.313,0.531 10 false J1 4.938,0.833 5.396,1.031 0.458,0.198 10 false SPI+ 4.083,0.823 4.542,1.021 0.458,0.198 10 false SPO+ 4.083,1.74 4.542,1.938 0.458,0.198 10 false SPO- 4.958,1.698 5.417,1.896 0.458,0.198 10 false SPI- 3.156,1.604 3.615,1.802 0.458,0.198 10 false TWR- 1.563,0.719 1.813,0.906 0.25,0.188 10 false + 1.573,1.615 1.813,1.813 0.24,0.198 10 false - 5.802,0.719 5.958,0.917 0.156,0.198 10 false 1 5.802,1.604 5.958,1.802 0.156,0.198 10 false 5 5.344,0.708 5.5,0.906 0.156,0.198 10 false 2 5.333,1.615 5.49,1.813 0.156,0.198 10 false 3 3.917,0.729 4.073,0.927 0.156,0.198 10 false 5 3.938,1.604 4.094,1.802 0.156,0.198 10 false 6 3.615,1.604 3.771,1.802 0.156,0.198 10 false 2 3.615,0.729 3.771,0.927 0.156,0.198 10 false 4 1.375,0.75 1.531,0.948 0.156,0.198 10 false 3 0.885,1.573 1.042,1.771 0.156,0.198 10 false 2 1.396,1.594 1.552,1.792 0.156,0.198 10 false 1 0.885,1 1.042,1.198 0.156,0.198 10 false 1 3.104,0.719 3.563,0.917 0.458,0.198 10 false TWR+ 5.781,3.448 5.938,3.646 0.156,0.198 10 false 2 5.781,4.281 5.938,4.479 0.156,0.198 10 false 6 4.563,3.417 4.719,3.615 0.156,0.198 10 false 4 4.563,4.271 4.719,4.469 0.156,0.198 10 false 2 4.063,3.417 4.521,3.615 0.458,0.198 10 false TWL+ 4.073,4.302 4.531,4.5 0.458,0.198 10 false TWL- 2.49,3.417 2.74,3.604 0.25,0.188 10 false + 2.49,4.302 2.74,4.49 0.25,0.188 10 false - 2.292,3.396 2.448,3.594 0.156,0.198 10 false 3 2.302,4.313 2.458,4.51 0.156,0.198 10 false 1 1.833,3.646 1.99,3.844 0.156,0.198 10 false 1 1.833,4.26 1.99,4.458 0.156,0.198 10 false 2 0.115,0.104 4.333,0.344 4.219,0.24 12 false w/ Manual (SOS) switch:

E359733E03
5.5,4.74 5.958,4.938 0.458,0.198 10 false F48 5.521,4.938 7.156,5.156 1.635,0.219 10 false Radio Receiver Assembly 6,4.333 6.458,4.531 0.458,0.198 10 false FL- 6,3.469 6.458,3.667 0.458,0.198 10 false FL+ 6,1.708 6.458,1.906 0.458,0.198 10 false FR- 6,0.833 6.458,1.031 0.458,0.198 10 false FR+ 2.396,4.906 5.052,5.271 2.656,0.365 10 false Front No. 2 Speaker Assembly LH 2.448,2.281 4.948,2.531 2.5,0.25 10 false Front No. 2 Speaker Assembly RH 0.271,3.948 1.615,4.375 1.344,0.427 10 false Front No. 1 Speaker Assembly LH 0.333,1.26 1.677,1.688 1.344,0.427 10 false Front No. 1 Speaker Assembly RH 1.854,3.635 2.01,3.833 0.156,0.198 10 false 1 1.833,0.948 1.99,1.146 0.156,0.198 10 false 1 2.313,1.583 2.469,1.781 0.156,0.198 10 false 1 2.292,4.208 2.448,4.406 0.156,0.198 10 false 1 5.76,0.688 5.917,0.885 0.156,0.198 10 false 1 5.771,1.594 5.927,1.792 0.156,0.198 10 false 5 1.823,1.552 1.979,1.75 0.156,0.198 10 false 2 1.833,4.188 1.99,4.385 0.156,0.198 10 false 2 4.594,4.208 4.75,4.406 0.156,0.198 10 false 2 5.76,3.323 5.917,3.521 0.156,0.198 10 false 2 4.583,1.573 4.74,1.771 0.156,0.198 10 false 2 2.292,3.323 2.448,3.521 0.156,0.198 10 false 3 2.292,0.677 2.448,0.875 0.156,0.198 10 false 3 4.583,0.667 4.74,0.865 0.156,0.198 10 false 4 4.573,3.344 4.729,3.542 0.156,0.198 10 false 4 5.771,4.208 5.927,4.406 0.156,0.198 10 false 6 2.417,4.729 2.74,4.917 0.323,0.188 10 false F86 2.458,2.104 2.781,2.292 0.323,0.188 10 false F85 2.521,0.698 2.677,0.896 0.156,0.198 10 false + 2.51,3.354 2.667,3.552 0.156,0.198 10 false + 2.51,1.604 2.667,1.802 0.156,0.198 10 false - 2.51,4.219 2.667,4.417 0.156,0.198 10 false - 0.292,3.76 0.615,3.948 0.323,0.188 10 false J1 0.344,1.063 0.667,1.25 0.323,0.188 10 false I1 0.104,0.146 3.771,0.344 3.667,0.198 12 false w/o Manual (SOS) switch: 4.031,0.688 4.646,0.885 0.615,0.198 10 false TWR+ 4.083,1.552 4.698,1.75 0.615,0.198 10 false TWR- 4.135,4.219 4.75,4.417 0.615,0.198 10 false TWL- 4.083,3.344 4.698,3.542 0.615,0.198 10 false TWL+


for 6 Speakers


E359690E04
5.479,8.094 7.094,8.625 1.615,0.531 10 false Radio Receiver Assembly 5.479,0.531 5.938,0.729 0.458,0.198 10 false F48 5.469,1.417 5.927,1.615 0.458,0.198 10 false F48 5.469,2.5 5.927,2.698 0.458,0.198 10 false F48 5.469,3.375 5.927,3.573 0.458,0.198 10 false F48 5.469,4.469 5.927,4.667 0.458,0.198 10 false F49 5.458,5.323 5.917,5.521 0.458,0.198 10 false F49 5.469,6.427 5.927,6.625 0.458,0.198 10 false F49 5.458,7.302 5.917,7.5 0.458,0.198 10 false F49 5.563,0.323 5.823,0.5 0.26,0.177 10 false 1 5.844,0.542 6.302,0.74 0.458,0.198 10 false FR+ 5.833,1.406 6.292,1.604 0.458,0.198 10 false FR- 5.823,2.51 6.281,2.708 0.458,0.198 10 false FL+ 5.844,3.365 6.302,3.563 0.458,0.198 10 false FL- 5.823,4.458 6.281,4.656 0.458,0.198 10 false RR+ 5.833,5.323 6.292,5.521 0.458,0.198 10 false RR- 5.833,7.292 6.292,7.49 0.458,0.198 10 false RL- 5.833,6.427 6.292,6.625 0.458,0.198 10 false RL+ 5.542,1.219 5.802,1.396 0.26,0.177 10 false 5 5.542,2.302 5.802,2.479 0.26,0.177 10 false 2 5.542,3.188 5.802,3.365 0.26,0.177 10 false 6 4.552,1.271 4.813,1.448 0.26,0.177 10 false 2 4.552,3.229 4.813,3.406 0.26,0.177 10 false 2 4.552,0.406 4.813,0.583 0.26,0.177 10 false 4 4.542,2.354 4.802,2.531 0.26,0.177 10 false 4 5.531,6.229 5.792,6.406 0.26,0.177 10 false 2 5.531,7.083 5.792,7.26 0.26,0.177 10 false 6 5.51,4.219 5.771,4.396 0.26,0.177 10 false 1 5.531,5.125 5.792,5.302 0.26,0.177 10 false 3 1.802,0.656 2.063,0.833 0.26,0.177 10 false 1 1.802,2.635 2.063,2.813 0.26,0.177 10 false 1 1.813,4.573 2.073,4.75 0.26,0.177 10 false 1 1.802,6.583 2.063,6.76 0.26,0.177 10 false 1 1.823,1.24 2.083,1.417 0.26,0.177 10 false 2 1.813,3.24 2.073,3.417 0.26,0.177 10 false 2 1.813,5.208 2.073,5.385 0.26,0.177 10 false 2 1.823,7.135 2.083,7.313 0.26,0.177 10 false 2 4.052,0.417 4.51,0.615 0.458,0.198 10 false TWR+ 4.104,1.302 4.563,1.5 0.458,0.198 10 false TWR- 4.042,2.365 4.5,2.563 0.458,0.198 10 false TWL+ 4.073,3.208 4.531,3.406 0.458,0.198 10 false TWL- 2.458,1.802 2.917,2 0.458,0.198 10 false F85 2.438,3.76 2.896,3.958 0.458,0.198 10 false F86 2.448,1.938 5,2.281 2.552,0.344 10 false Front No. 2 Speaker Assembly RH 2.427,3.927 5.198,4.188 2.771,0.26 10 false Front No. 2 Speaker Assembly LH 0.396,0.75 0.854,0.948 0.458,0.198 10 false I1 0.385,0.948 1.656,1.313 1.271,0.365 10 false Front No. 1 Speaker Assembly RH 0.396,2.75 0.854,2.948 0.458,0.198 10 false J1 0.396,2.917 1.667,3.281 1.271,0.365 10 false Front No. 1 Speaker Assembly LH 0.646,4.677 1.104,4.875 0.458,0.198 10 false K4 0.635,4.844 1.521,5.271 0.885,0.427 10 false Rear Speaker Assembly RH 0.667,6.698 1.125,6.896 0.458,0.198 10 false L4 0.667,6.875 1.542,7.333 0.875,0.458 10 false Rear Speaker Assembly LH 2.281,0.385 2.542,0.563 0.26,0.177 10 false 3 2.281,2.385 2.542,2.563 0.26,0.177 10 false 3 2.26,1.271 2.521,1.448 0.26,0.177 10 false 1 2.271,3.26 2.531,3.438 0.26,0.177 10 false 1 2.479,0.396 2.635,0.594 0.156,0.198 10 false + 2.479,2.385 2.635,2.583 0.156,0.198 10 false + 2.5,1.281 2.656,1.479 0.156,0.198 10 false - 2.479,3.26 2.635,3.458 0.156,0.198 10 false -


PROCEDURE

1.CONFIRM MODEL
a.

Choose the model to be inspected.

Result:
Result Proceed to
for 4 Speakers (w/ Manual (SOS) Switch) A
for 4 Speakers (w/o Manual (SOS) Switch) B
for 6 Speakers C




A

2.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY- TELEMATICS TRANSCEIVER - FRONT NO. 2 SPEAKER ASSEMBLY)

B

8.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY- SPEAKERS)

C

12.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - SPEAKERS)
2.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY- TELEMATICS TRANSCEIVER - FRONT NO. 2 SPEAKER ASSEMBLY)
a.

Disconnect the F48 radio receiver assembly connector.


b.

Disconnect the F51 telematics transceiver connector.


c.

Disconnect the F85 and F86 front No. 2 speaker assembly connectors.


d.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F48-1 (FR+) - F51-2 (SPI+) Always Below 1 Ω
F48-5 (FR-) - F51-3 (SPI-) Always Below 1 Ω
F51-5 (SPO+) - F85-4 (TWR+) Always Below 1 Ω
F51-6 (SPO-) - F85-2 (TWR-) Always Below 1 Ω
F48-2 (FL+) - F86-4 (TWL-) Always Below 1 Ω
F48-6 (FL-) - F86-2 (TWL-) Always Below 1 Ω
F48-1 (FR+) or F51-2 (SPI+) - Body ground Always 10 kΩ or higher
F48-5 (FR-) or F51-3 (SPI-) - Body ground Always 10 kΩ or higher
F51-5 (SPO+) or F85-4 (TWR+) - Body ground Always 10 kΩ or higher
F51-6 (SPO-) or F85-2 (TWR-) - Body ground Always 10 kΩ or higher
F48-2 (FL+) or F86-4 (TWL+) - Body ground Always 10 kΩ or higher
F48-6 (FL-) or F86-2 (TWL-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

3.CHECK HARNESS AND CONNECTOR (FRONT NO. 1 SPEAKER ASSEMBLY - FRONT NO. 2 SPEAKER ASSEMBLY)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.CHECK HARNESS AND CONNECTOR (FRONT NO. 1 SPEAKER ASSEMBLY - FRONT NO. 2 SPEAKER ASSEMBLY)
a.

Disconnect the I1 and J1 front No. 1 speaker assembly connectors.


b.

Disconnect the F85 and F86 front No. 2 speaker assembly connectors.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
I1-1 - F85-3 (+) Always Below 1 Ω
I1-2 - F85-1 (-) Always Below 1 Ω
J1-1 - F86-3 (+) Always Below 1 Ω
J1-2 - F86-1 (-) Always Below 1 Ω
I1-1 or F85-3 (+) - Body ground Always 10 kΩ or higher
I1-2 or F85-1 (-) - Body ground Always 10 kΩ or higher
J1-1 or F86-3 (+) - Body ground Always 10 kΩ or higher
J1-2 or F86-1 (-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

4.INSPECT TELEMATICS TRANSCEIVER

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.INSPECT TELEMATICS TRANSCEIVER
a.

Remove the telematics transceiver.

Click hereAudio / Visual / Telematics>TELEMATICS>TELEMATICS TRANSCEIVER>REMOVAL


b.
E169849C34
2.51,1.917 2.677,1.5 2.677,1.5 2.75,1.5 false 2.302,1.906 2.188,1.5 2.188,1.5 2.083,1.5 false 0.781,1.906 0.667,1.5 0.667,1.5 0.583,1.5 false 0.979,1.917 1.146,1.5 1.146,1.5 1.25,1.5 false 2.781,1.417 3.146,1.635 0.365,0.219 10 false SPI+ 1.792,1.427 2.167,1.594 0.375,0.167 10 false SPI- 1.292,1.417 1.781,1.583 0.49,0.167 10 false SPO+ 0.198,1.427 0.667,1.646 0.469,0.219 10 false SPO- 0.167,0.177 0.448,0.417 0.281,0.24 10 false *a
*a Component without harness connected
(Telematics Transceiver)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (SPI+) - 5 (SPO+) Always Below 1 Ω
3 (SPI-) - 6 (SPO-) Always Below 1 Ω
2 (SPI+) - 3 (SPI-) Always 10 kΩ or higher
5 (SPO+) - 6 (SPO-) Always 10 kΩ or higher
2 (SPI+) or 5 (SPO+) - Body ground Always 10 kΩ or higher
3 (SPI-) or 6 (SPO-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

5.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

NG

5.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
a.

Remove the front No. 1 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL


b.

Inspect the front No. 1 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>INSPECTION


Result:
Proceed to
OK
NG



OK

6.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

6.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY
a.

Remove the front No. 2 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL


b.

Inspect the front No. 2 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>INSPECTION


Result:
Proceed to
OK
NG



OK

7.REPLACE FRONT NO. 2 SPEAKER ASSEMBLY

NG

7.REPLACE FRONT NO. 2 SPEAKER ASSEMBLY
a.

Check that the malfunction disappears when a known good speaker is installed.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL

OK:

Malfunction disappears.


HINT:
·

Connect all the connectors to the front No. 2 speaker assemblies that were disconnected.

·

When there is a possibility that either the right or left front No. 2 speaker assembly is defective, inspect by interchanging the right one with the left one.

·

Perform the above inspection on both LH and RH sides.




Result:
Proceed to
OK
NG



OK

END (FRONT NO. 2 SPEAKER ASSEMBLY WAS DEFECTIVE)

NG

8.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY- SPEAKERS)
a.

Disconnect the F48 radio receiver assembly connector.


b.

Disconnect the I1 and J1 front No. 1 speaker assembly connectors.


c.

Disconnect the F85 and F86 front No. 2 speaker assembly connectors.


d.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F48-1 (FR+) - F85-4 (TWR+) Always Below 1 Ω
F48-5 (FR-) - F85-2 (TWR-) Always Below 1 Ω
F85-3 (+) - I1-1 Always Below 1 Ω
F85-1 (-) - I1-2 Always Below 1 Ω
F48-2 (FL+) - F86-4 (TWL+) Always Below 1 Ω
F48-6 (FL-) - F86-2 (TWL-) Always Below 1 Ω
F86-3 (+) - J1-1 Always Below 1 Ω
F86-1 (-) - J1-2 Always Below 1 Ω
F48-1 (FR+) or F85-4 (TWR+) - Body ground Always 10 kΩ or higher
F48-5 (FR-) or F85-2 (TWR-) - Body ground Always 10 kΩ or higher
F85-3 (+) or I1-1 - Body ground Always 10 kΩ or higher
F85-1 (-) or I1-2 - Body ground Always 10 kΩ or higher
F48-2 (FL+) or F86-4 (TWL+) - Body ground Always 10 kΩ or higher
F48-6 (FL-) or F86-2 (TWL-) - Body ground Always 10 kΩ or higher
F86-3 (+) or J1-1 - Body ground Always 10 kΩ or higher
F86-1 (-) or J1-2 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

9.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

9.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
a.

Remove the front No. 1 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL


b.

Inspect the front No. 1 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>INSPECTION


Result:
Proceed to
OK
NG



OK

10.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

10.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY
a.

Remove the front No. 2 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL


b.

Inspect the front No. 2 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>INSPECTION


Result:
Proceed to
OK
NG



OK

11.REPLACE FRONT NO. 2 SPEAKER ASSEMBLY

NG

REPLACE FRONT NO. 2 SPEAKER ASSEMBLY

11.REPLACE FRONT NO. 2 SPEAKER ASSEMBLY
a.

Check that the malfunction disappears when a known good speaker is installed.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL

OK:

Malfunction disappears.


HINT:
·

Connect all the connectors to the front No. 2 speaker assemblies that were disconnected.

·

When there is a possibility that either the right or left front No. 2 speaker assembly is defective, inspect by interchanging the right one with the left one.

·

Perform the above inspection on both LH and RH sides.




Result:
Proceed to
OK
NG



OK

END (FRONT NO. 2 SPEAKER ASSEMBLY WAS DEFECTIVE)

NG

12.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - SPEAKERS)
a.

Disconnect the F48 and F49 radio receiver assembly connectors.


b.

Disconnect the I1 and J1 front No. 1 speaker assembly connectors.


c.

Disconnect the F85 and F86 front No. 2 speaker assembly connectors.


d.

Disconnect the K4 and L4 rear speaker assembly connectors.


e.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F48-1 (FR+) - F85-4 (TWR+) Always Below 1 Ω
F48-5 (FR-) - F85-2 (TWR-) Always Below 1 Ω
F85-3 (+) - I1-1 Always Below 1 Ω
F85-1 (-) - I1-2 Always Below 1 Ω
F48-2 (FL+) - F86-4 (TWL+) Always Below 1 Ω
F48-6 (FL-) - F86-2 (TWL-) Always Below 1 Ω
F86-3 (+) - J1-1 Always Below 1 Ω
F86-1 (-) - J1-2 Always Below 1 Ω
F49-1 (RR+) - K4-1 Always Below 1 Ω
F49-3 (RR-) - K4-2 Always Below 1 Ω
F49-2 (RL+) - L4-1 Always Below 1 Ω
F49-6 (RL-) - L4-2 Always Below 1 Ω
F48-1 (FR+) or F85-4 (TWR+) - Body ground Always 10 kΩ or higher
F48-5 (FR-) or F85-2 (TWR-) - Body ground Always 10 kΩ or higher
F85-3 (+) or I1-1 - Body ground Always 10 kΩ or higher
F85-1 (-) or I1-2 - Body ground Always 10 kΩ or higher
F48-2 (FL+) or F86-4 (TWL+) - Body ground Always 10 kΩ or higher
F48-6 (FL-) or F86-2 (TWL-) - Body ground Always 10 kΩ or higher
F86-3 (+) or J1-1 - Body ground Always 10 kΩ or higher
F86-1 (-) or J1-2 - Body ground Always 10 kΩ or higher
F49-1 (RR+) or K4-1 - Body ground Always 10 kΩ or higher
F49-3 (RR-) or K4-2 - Body ground Always 10 kΩ or higher
F49-2 (RL+) or L4-1 - Body ground Always 10 kΩ or higher
F49-6 (RL-) or L4-2 - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

13.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

13.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
a.

Remove the front No. 1 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL


b.

Inspect the front No. 1 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>INSPECTION


Result:
Proceed to
OK
NG



OK

14.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

14.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY
a.

Remove the front No. 2 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL


b.

Inspect the front No. 2 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>INSPECTION


Result:
Proceed to
OK
NG



OK

15.REPLACE FRONT NO. 2 SPEAKER ASSEMBLY

NG

REPLACE FRONT NO. 2 SPEAKER ASSEMBLY

15.REPLACE FRONT NO. 2 SPEAKER ASSEMBLY
a.

Check that the malfunction disappears when a known good speaker is installed.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL

OK:

Malfunction disappears.


HINT:
·

Connect all the connectors to the front No. 2 speaker assemblies that were disconnected.

·

When there is a possibility that either the right or left front No. 2 speaker assembly is defective, inspect by interchanging the right one with the left one.

·

Perform the above inspection on both LH and RH sides.




Result:
Proceed to
OK
NG



OK

END (FRONT NO. 2 SPEAKER ASSEMBLY WAS DEFECTIVE)

NG

16.INSPECT REAR SPEAKER ASSEMBLY
16.INSPECT REAR SPEAKER ASSEMBLY
a.

Remove the rear speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>REMOVAL


b.

Inspect the rear speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>INSPECTION


Result:
Proceed to
OK
NG



OK

NG