Home › General › MAINTENANCE › EC6A MANUAL TRANSAXLE OIL
RM32H0E _V1 General _059503 MAINTENANCE _0303143 EC6A MANUAL TRANSAXLE OIL A

MAINTENANCE  EC6A MANUAL TRANSAXLE OIL  REPLACEMENT  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 51444A 2.REMOVE REAR ENGINE UNDER COVER LH

Hide 3.DRAIN MANUAL TRANSAXLE OIL

a.
C366726C01
1.708,0.5 1.958,0.25 true 1.667,2 1.917,1.75 true 2.031,0.146 2.198,0.313 0.167,0.167 10 true *1 1.979,1.646 2.146,1.813 0.167,0.167 10 true *2
*1 Manual Transmission Filler Plug
*2 Manual Transmission Drain Plug


Remove the manual transmission filler plug and gasket.


b.

Using a 10 mm hexagon socket wrench, remove the manual transmission drain plug and gasket to drain the manual transaxle oil.


c.

Using a 10 mm hexagon socket wrench, install a new gasket and the manual transmission drain plug.

Torque:
45 N*m (459 kgf*cm, 33 ft.*lbf)


Hide 4.ADD MANUAL TRANSAXLE OIL

a.
D025304C02
0.698,1.344 1.01,1.594 0.313,0.25 10 *a
*a 0 to 5 mm (0 to 0.197 in.)


Add manual transaxle oil until the oil level is between 0 and 5 mm (0.197 in.) from the bottom lip of the manual transmission filler plug opening.

Manual Transaxle Oil:

"Toyota Genuine Manual Transmission Gear Oil LV" or "API GL-4 and SAE 75W"


Standard Capacity:

2.4 liters (2.5 US qts, 2.1 Imp. qts)



b.

Install a new gasket and the manual transmission filler plug.

Torque:
39.2 N*m (400 kgf*cm, 29 ft.*lbf)

NOTICE:
·

When adding manual transaxle oil, make sure that the vehicle is level.

·

An excessively large or small amount of manual transaxle oil may cause problems.

·

After adding manual transaxle oil, drive the vehicle and recheck the oil level.




Hide 5.INSPECT FOR MANUAL TRANSAXLE OIL LEAK

Hide 51444A 6.INSTALL REAR ENGINE UNDER COVER LH

Hide 51441 7.INSTALL NO. 1 ENGINE UNDER COVER