Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR › from 2019.09
RM32H0E _59 Vehicle Exterior _060017 DOOR / HATCH _0295669 BACK DOOR A

DOOR / HATCH  BACK DOOR  DISASSEMBLY  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during back door disassembly/reassembly are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Rear television camera assembly Rear television camera view adjustment Panoramic view monitor system (Click here)

PROCEDURE

Hide 64330D 1.REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)

Hide 64910J 2.REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

Hide 64790B 3.REMOVE BACK DOOR TRIM UPPER PANEL ASSEMBLY

a.
B458049

Disengage the claws and clips to remove the back door trim upper panel assembly.


Hide 67938A 4.REMOVE BACK DOOR SIDE GARNISH LH

a.
B458050

Disengage the claws and clips to remove the back door side garnish LH.


Hide 67937B 5.REMOVE BACK DOOR SIDE GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 64338D 6.REMOVE PACKAGE TRAY TRIM GARNISH HOOK

HINT:

Use the same procedure for the RH side and LH side.


a.
B458056

Remove the screw.


b.
B458057

Remove the package tray trim garnish hook.


Hide 64780A 7.REMOVE BACK DOOR TRIM PANEL ASSEMBLY

a.
B458051

Disengage the clips to remove the back door trim panel assembly.


Hide 74811B 8.REMOVE DOOR PULL HANDLE

a.
B500936

Using a moulding remover D, disengage the claws to remove the door pull handle.


Hide 67765A 9.REMOVE NO. 1 BACK DOOR SERVICE HOLE COVER

a.
B458053

Disengage the claws to remove the No. 1 back door service hole cover.


Hide 67765A 10.REMOVE NO. 2 BACK DOOR SERVICE HOLE COVER

HINT:

Use the same procedure as for the No. 1 back door service hole cover.


Hide 67765A 11.REMOVE NO. 3 BACK DOOR SERVICE HOLE COVER

a.
B458054

Disengage the claws to remove the No. 3 back door service hole cover.


Hide 67765A 12.REMOVE BACK DOOR SERVICE HOLE COVER LH

a.
B458055

Disengage the claws to remove the back door service hole cover LH.


Hide 67765A 13.REMOVE BACK DOOR SERVICE HOLE COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 69321 14.REMOVE BACK DOOR LOCK COVER

a.
B458058C01
0,0 0,0 false
V100155

Double-sided Tape


Disengage the claws.


b.

Remove the double-sided tape and back door lock cover.

NOTICE:

Remove any remaining double-sided tape from the back door.



Hide 69350P 15.REMOVE BACK DOOR LOCK ASSEMBLY

Hide 16.REMOVE REAR WIPER ARM AND BLADE ASSEMBLY

Hide 85110R 17.REMOVE REAR WIPER MOTOR ASSEMBLY

Hide 85143R 18.REMOVE REAR WIPER MOTOR GROMMET

Hide 67282F 19.REMOVE BACK DOOR LOWER STOPPER

a.
B458059

Remove the bolt.


b.

Disengage the guide to remove the back door lower stopper.

HINT:

Use the same procedure for the RH side and LH side.



Hide 20.REMOVE REAR SPOILER ASSEMBLY

Hide 85345R 21.REMOVE REAR WASHER NOZZLE

Hide 81962 22.REMOVE REAR LIGHT COVER LH (w/ Cover)

Hide 81952A 23.REMOVE REAR LIGHT COVER RH (w/ Cover)

HINT:

Use the same procedure as for the LH side.


Hide 24.REMOVE BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

Hide 84840G 25.REMOVE BACK DOOR OPENER SWITCH ASSEMBLY

Hide 81270B 26.REMOVE LICENSE PLATE LIGHT ASSEMBLY

Hide 86790D 27.REMOVE REAR TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)

Hide 76827A 28.REMOVE NO. 2 BACK DOOR GARNISH RETAINER (w/o Rear View Monitor System)

a.
B458223

Disengage the claws to remove the No. 2 back door garnish retainer.


Hide 67005B 29.REMOVE BACK DOOR PANEL CUSHION

a.
B458060

Disengage the claws to remove the 2 back door panel cushions.


Hide 67894B 30.REMOVE NO. 2 BACK DOOR PANEL PROTECTOR

a.
B458064C01
0,0 0,0 false
V100155

Double-sided Tape


Using a clip remover, disengage the clips.


b.

Remove the double-sided tape and No. 2 back door panel protector.

NOTICE:

Remove any remaining double-sided tape from the back door.



Hide 67893A 31.REMOVE NO. 1 BACK DOOR PANEL PROTECTOR

HINT:

Use the same procedure for the No. 2 back door panel protector.


Hide 81590A 32.REMOVE REAR LIGHT ASSEMBLY LH

Hide 81580D 33.REMOVE REAR LIGHT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 35.REMOVE HOLE PLUG

a.
B557521

Remove the hole plug.


Hide 75441E 36.REMOVE NO. 1 BACK DOOR NAME PLATE (w/ Brand Mark)

Hide 75442A 37.REMOVE NO. 2 BACK DOOR NAME PLATE

Hide 75444A 38.REMOVE NO. 4 BACK DOOR NAME PLATE (for AWD)

Hide 75431A 39.REMOVE NO. 1 BACK DOOR EMBLEM