FAIL-SAFE CHART
System information · Vehicles built from Oct 2006
| FRONT WIPER SYSTEM |
When the wiper motor malfunctions, the windshield wiper relay assembly (auto wiper relay) terminates both the rain sensing function and the wiper operation.
When the rain sensor malfunctions, the windshield wiper relay assembly (auto wiper relay) sets the wiper interval depending on the vehicle speed and automatic adjuster position, as follows:
While stationary: Approximately 4 to 13 seconds, in accordance with the automatic control adjuster position.
At low speeds (*1): Approximately 3 to 14 seconds, in accordance with the automatic control adjuster position.
At normal speeds (*2): Approximately 2 to 10 seconds, in accordance with the automatic control adjuster position.
- HINT:
- *1: Approximately 6 to 23 km/h (4 to 14 mph) during acceleration. Approximately 4 to 16 km/h (2.5 to 10 mph) during deceleration.
- *2: Approximately 23 km/h (14 mph) or more during acceleration. Approximately 16 km/h (10 mph) or more during deceleration.
- *1: Approximately 6 to 23 km/h (4 to 14 mph) during acceleration. Approximately 4 to 16 km/h (2.5 to 10 mph) during deceleration.