2006-2011 Camry Aurion · Service Manual RESTRAINTS

REMOVAL

Removal / installation · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009

HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The procedure listed below are for the LH side.


1. PRECAUTION

CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.


3. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)

  1. B136575E01
    Detach the 2 front hooks of the seat cushion from the vehicle body.

    NOTICE:
    Follow the instructions below carefully as the cushion frame can be deformed easily.


    1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

    2. Repeat the step above for the other hook.

  1. Remove the rear seat cushion assembly.


4. REMOVE REAR SEAT HEADREST ASSEMBLY (for Fixed Seat Type)

5. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY (for Fixed Seat Type)

6. REMOVE REAR SEATBACK ASSEMBLY (for Fixed Seat Type)

  1. B136576
    Remove the 3 rear seat belts from the 3 rear seat shoulder belt guides.

  1. B136577
    Remove the 4 bolts and rear seatback assembly.


7. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)

  1. B134699E01
    Detach the 2 front hooks of the seat cushion from the vehicle body.

    NOTICE:
    Follow the instructions below carefully as the cushion frame can be deformed easily.


    1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

    2. Repeat the step above for the other hook.

  1. Remove the seat cushion.


8. REMOVE REAR DOOR SCUFF PLATE (for Fold Down Seat Type)

  1. B132068
    Disengage the 5 claws and 2 clips, and remove the rear door scuff plate LH.


9. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP (for Fold Down Seat Type)

10. REMOVE ROOF SIDE INNER GARNISH (for Fold Down Seat Type)

  1. B132063
    Disengage the 5 clips and 2 claws, and remove the roof side inner garnish LH.


11. REMOVE REAR SIDE SEATBACK ASSEMBLY (for Fold Down Seat Type)

  1. B136561
    Remove the bolt and rear side seatback assembly LH.


12. REMOVE REAR AIRBAG SENSOR

  1. C133889
    Disconnect the connector.

  1. Remove the bolt and rear airbag sensor.

← ON-VEHICLE INSPECTION (from Jun 2009)REMOVAL (Oct 2006 – May 2009) →