REMOVAL
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
- HINT:
- Use the same procedure for the RH side and LH side.
- The procedure listed below are for the LH side.
| 1.
PRECAUTION |
 |
- CAUTION:
- Be sure to read "PRECAUTION" thoroughly before servicing (Click here).
| 2.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.
| 3.
REMOVE REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)
|
 |
- Detach the 2 front hooks of the seat cushion from the vehicle body.
- NOTICE:
- Follow the instructions below carefully as the cushion frame can be deformed easily.
Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
Repeat the step above for the other hook.
Remove the rear seat cushion assembly.
| 4.
REMOVE REAR SEAT HEADREST ASSEMBLY (for Fixed Seat Type) |
|
| 5.
REMOVE REAR CENTER SEAT HEADREST ASSEMBLY (for Fixed Seat Type) |
|
| 6.
REMOVE REAR SEATBACK ASSEMBLY (for Fixed Seat Type)
|
 |
- Remove the 3 rear seat belts from the 3 rear seat shoulder belt guides.
- Remove the 4 bolts and rear seatback assembly.
| 7.
REMOVE REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)
|
 |
- Detach the 2 front hooks of the seat cushion from the vehicle body.
- NOTICE:
- Follow the instructions below carefully as the cushion frame can be deformed easily.
Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
Repeat the step above for the other hook.
Remove the seat cushion.
| 8.
REMOVE REAR DOOR SCUFF PLATE (for Fold Down Seat Type)
|
 |
- Disengage the 5 claws and 2 clips, and remove the rear door scuff plate LH.
| 9.
REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP (for Fold Down Seat Type) |
|
| 10.
REMOVE ROOF SIDE INNER GARNISH (for Fold Down Seat Type)
|
 |
- Disengage the 5 clips and 2 claws, and remove the roof side inner garnish LH.
| 11.
REMOVE REAR SIDE SEATBACK ASSEMBLY (for Fold Down Seat Type)
|
 |
- Remove the bolt and rear side seatback assembly LH.
| 12.
REMOVE REAR AIRBAG SENSOR |
 |
- Disconnect the connector.
Remove the bolt and rear airbag sensor.