U0073/94 Control Module Communication Bus OFF
Diagnostic trouble codes · Vehicles built Jun 2006 – Sep 2006
Also covers:
- U0100/65 Lost Communication with ECM / PCM
- U0123/62 Lost Communication with Yaw Rate Sensor Module
- U0126/63 Lost Communication with Steering Angle Sensor Module
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
DESCRIPTION
The skid control ECU receives the signals from the ECM, steering angle sensor, and yaw rate and acceleration sensor via the CAN communication system.| DTC No. |
DTC Detection Condition |
Trouble Area |
| U0073/94 |
When either of the following is detected:
|
CAN communication system |
| U0100/65 |
When either of the following is detected:
|
CAN communication system (Skid control ECU to ECM) |
| U0123/62 |
When any of the following is detected:
|
CAN communication system (Skid control ECU to yaw rate and acceleration sensor) |
| U0126/63 |
When any of the following is detected:
|
CAN communication system (Skid control ECU to steering angle sensor) |
WIRING DIAGRAM


INSPECTION PROCEDURE
Proceed to CAN communication system troubleshooting (Click here for LHD, Click here for RHD).- HINT:
- When a DTC indicating a CAN communication system malfunction is output, repair the CAN communication system before repairing each corresponding sensor.