Door LOCK Position Circuit
Circuit diagnosis · Vehicles built Jun 2006 – May 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
DESCRIPTION
The main body ECU receives door lock position switch signal to control the illuminated entry system.WIRING DIAGRAM




INSPECTION PROCEDURE
| 1. READ VALUE USING INTELLIGENT TESTER |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position and turn the intelligent tester main switch on.
Select the items below in the DATA LIST, and read the display on the intelligent tester.
Main Body (Main Body ECU): (for RHD) Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
D-Door Lock Pos SW
Driver side door lock position switch signal / ON or OFF
ON: Driver side door is unlocked
OFF: Driver side door is locked
-
P-Door Lock Pos SW
Passenger side or rear LH or rear RH door lock position switch signal / ON or OFF
ON: Passenger side or rear LH or rear RH door is unlocked
OFF: Passenger side and rear LH and rear RH doors are locked
-
Main Body (Main Body ECU): (for LHD) Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
D-Door Lock Pos SW
Driver side door lock position switch signal / ON or OFF
ON: Driver side door is unlocked
OFF: Driver side door is locked
-
P-Door Lock Pos SW
Passenger side door lock position switch signal / ON or OFF
ON: Passenger side door is unlocked
OFF: Passenger side door is locked
-
- OK:
- Normal conditions listed above are displayed.
|
|
||||
| OK | ||
| ||
