2006-2011 Camry Aurion · Service Manual BODY

HOW TO PROCEED WITH TROUBLESHOOTING

Troubleshooting · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009

HINT:
  1. Use the following procedure to troubleshoot the power window control system.
  2. The intelligent tester should be used in steps 3 and 5.


1.VEHICLE BROUGHT TO WORKSHOP
    NEXT

    2.CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK
      NEXT

      3.CHECK COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM
      1. Using the intelligent tester, inspect the LIN communication function to ensure there are no malfunctions in the communication system.

        Result:
        Result
        Proceed to
        No DTCs output
        A
        DTCs output
        B


      B.
      A

      4.PROBLEM SYMPTOMS TABLE

        HINT:
        Click here.

      NEXT

      5.OVERALL ANALYSIS AND TROUBLESHOOTING
      1. Data list/Active test

        HINT:
        Click here.

      2. Circuit inspection

      3. Terminal of ECU

        HINT:
        Click here.

      NEXT

      6.ADJUST, REPAIR OR REPLACE
        NEXT

        7.RESET POWER WINDOW MOTOR

          HINT:
          Click here.

        NEXT

        ← HOW TO PROCEED WITH TROUBLESHOOTING (Oct 2006 – May 2009)OPERATION CHECK (Jun 2006 – Sep 2006) →