2006-2011 Camry Aurion · Service Manual BRAKE

C1288/88 ECU Version Miss Match

Diagnostic trouble codes · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009

DESCRIPTION

DTC No.
DTC Detection Condition
Trouble Area
C1288/88
ECM does not match
ECM

INSPECTION PROCEDURE


1. CHECK CAN COMMUNICATION SYSTEM
  1. Check if a CAN communication system DTC is output (Click here).

    Result:
    Result
    Proceed to
    CAN communication system DTC is not output
    A
    CAN communication system DTC is output
    B



B
INSPECT CAN COMMUNICATION SYSTEM (Click here)
A


2. PERFORM ENGINE VARIANT LEARNING
  1. Perform engine variant learning (Click here ENGINE VARIANT LEARNING).

    HINT:
    1. Engine variant learning is automatically performed immediately after the Test Mode is entered.
    2. The ABS, VSC, BRAKE, and SLIP indicators come on for 3 seconds after learning.


NEXT


3. RECONFIRM DTC
  1. Clear the DTCs (Click here).

  1. Start the engine.

  1. Check if the same DTC is recorded (Click here).

    Result:
    Result
    Proceed to
    DTC is not output
    A
    DTC is output
    B



B
REPLACE ECM (Click here)
A

END


← C1249/49 Open in Stop Light Switch Circuit (from Jun 2009)C1288/88 ECU Version Miss Match (Oct 2006 – May 2009) →