REMOVAL
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
- NOTICE:
- When the TCM is replaced, the existing transaxle compensation codes must be input into the new TCM (Click here).
| 1.
REMOVE COOL AIR INTAKE DUCT SEAL
|
 |
- Remove the 7 clips and intake duct seal.
| 2.
REMOVE BATTERY
|
 |
- Loosen the nut, and remove the bolt and battery clamp.
Remove the battery and battery tray.
| 3.
REMOVE AIR CLEANER INLET ASSEMBLY
|
 |
- Remove the 2 bolts, clamp and air cleaner inlet.
| 4.
REMOVE NO. 1 AIR CLEANER INLET
|
 |
- Remove the bolt and No. 1 air cleaner inlet.
| 5.
REMOVE INTAKE AIR RESONATOR SUB-ASSEMBLY
|
 |
- Remove the clip, bolt and intake air resonator.
| 6.
REMOVE TCM |
 |
- Turn the lock lever and disconnect the connector from the TCM.
- Remove the 2 bolts and TCM from the transaxle.