2006-2011 Camry Aurion · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009

NOTICE:
When the TCM is replaced, the existing transaxle compensation codes must be input into the new TCM (Click here).


1. REMOVE COOL AIR INTAKE DUCT SEAL

  1. A141576E01
    Remove the 7 clips and intake duct seal.


2. REMOVE BATTERY

  1. A132972
    Loosen the nut, and remove the bolt and battery clamp.

  1. Remove the battery and battery tray.


3. REMOVE AIR CLEANER INLET ASSEMBLY

  1. A132969
    Remove the 2 bolts, clamp and air cleaner inlet.


4. REMOVE NO. 1 AIR CLEANER INLET

  1. A132970
    Remove the bolt and No. 1 air cleaner inlet.


5. REMOVE INTAKE AIR RESONATOR SUB-ASSEMBLY

  1. A133928
    Remove the clip, bolt and intake air resonator.


6. REMOVE TCM

  1. C133604
    Turn the lock lever and disconnect the connector from the TCM.

  1. C139840E01
    Remove the 2 bolts and TCM from the transaxle.

← REMOVAL (Oct 2006 – May 2009)INSTALLATION (Oct 2006 – May 2009) →