2006-2011 Camry Aurion · Service Manual RESTRAINTS

HOW TO PROCEED WITH TROUBLESHOOTING

Troubleshooting · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009

HINT:
*: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP
    NEXT

    2.CUSTOMER PROBLEM ANALYSIS
    1. Confirm problem symptoms (Click here).

    NEXT

    3.CHECK CAN COMMUNICATION SYSTEM*
    1. Check for DTC outputs.

      HINT:
      The center airbag sensor assembly is connected to the CAN communication system. Therefore, before starting troubleshooting, make sure to check that there is no trouble in the CAN communication system.

    2. Result:
      Result
      Proceed to
      CAN communication DTC is not output.
      A
      CAN communication DTC is output.
      B


    B.
    A

    4.SRS WARNING LIGHT CHECK
      NEXT

      5.CHECK FOR DTC (Present and Past DTCs)*
      1. Check for DTC outputs.

      2. Result:
        Result
        Proceed to
        DTC is output.
        A
        DTC is not output.
        B


      B.
      A

      6.DTC CHART
        NEXT

        7.CIRCUIT INSPECTION*
          NEXT

          8.REPAIR
            NEXT

            9.CLEAR DTC (Present and Past DTCs)*
              NEXT

              10.CHECK FOR DTC (Present and Past DTCs)*
              1. Check for DTC outputs.

              2. Result:
                Result
                Proceed to
                DTC is not output.
                A
                DTC is output.
                B


              B.
              A

              11.CONFIRMATION TEST
                NEXT

                ← SYSTEM DESCRIPTION (from Jun 2006)HOW TO PROCEED WITH TROUBLESHOOTING (Oct 2006 – May 2009) →