2006-2011 Camry Aurion · Service Manual RESTRAINTS

HOW TO PROCEED WITH TROUBLESHOOTING

Troubleshooting · Vehicles built Oct 2006 – May 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009

HINT:
*: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP
    NEXT

    2.CUSTOMER PROBLEM ANALYSIS
    1. Confirm problem symptoms (Click here).

    NEXT

    3.CHECK CAN COMMUNICATION SYSTEM*
    1. Use the intelligent tester to check if the CAN communication system is functioning normally.

      HINT:
      The center airbag sensor assembly is connected to the CAN communication system. Therefore, before starting troubleshooting, make sure to check that there is no trouble in the CAN communication system.
      Refer to the "Bus Check" for CAN communication system.
      1. Click here for LHD with Smart Entry and Start System
      1. Click here for LHD without Smart Entry and Start System
      1. Click here for RHD with Smart Entry and Start System
      1. Click here for RHD without Smart Entry and Start System

    2. Result:
      Result
      Proceed to
      CAN communication DTC is not output.
      A
      CAN communication DTC is output.
      B


    B.
    A

    4.SRS WARNING LIGHT CHECK
      NEXT

      5.CHECK FOR DTC (Present and Past DTCs)*
      1. Check for DTC outputs.

      2. Result:
        Result
        Proceed to
        DTC is output.
        A
        DTC is not output.
        B


      B.
      A

      6.DTC CHART
        NEXT

        7.CIRCUIT INSPECTION*
          NEXT

          8.REPAIR
            NEXT

            9.CLEAR DTC (Present and Past DTCs)*
              NEXT

              10.CHECK FOR DTC (Present and Past DTCs)*
              1. Check for DTC outputs.

              2. Result:
                Result
                Proceed to
                DTC is not output.
                A
                DTC is output.
                B


              B.
              A

              11.CONFIRMATION TEST
                NEXT

                ← HOW TO PROCEED WITH TROUBLESHOOTING (Jun 2006 – Sep 2006)HOW TO PROCEED WITH TROUBLESHOOTING (from Jun 2009) →