Circuit diagnosis · Vehicles built Jun 2006 – May 2009
Versions by build date: Jun 2006 – May 2009from Jun 2009
DESCRIPTION
The rear left door unlock detection switch is built into the rear left door lock assembly. The switch turns on when the rear left door is unlocked and turns off when the door is locked. The main body ECU is connected to the rear left door lock assembly via terminal LSWP and rear left door lock/unlock state signals are input to the ECU. The main body ECU applies voltage to the door unlock detection switch via terminal LSWP. When the door unlock detection switch is on (there is continuity between the switch terminals), an unlock state signal is input to the ECU. When the switch is off (there is no continuity between the switch terminals), a lock state signal is input.
WIRING DIAGRAM
INSPECTION PROCEDURE
1. INSPECT REAR DOOR LOCK ASSEMBLY (UNLOCK DETECTION SWITCH)
Remove the rear door lock assembly LH.
Measure the resistance according to the value(s) in the table below.