2006-2011 Camry Aurion · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2006


INSPECT EVAP VSV

  1. A124791E02
    Check the VSV for an open circuit.

    1. Measure the resistance.

      Standard resistance:
      Tester Connection
      Specified Condition
      1 - 2
      23 to 26 Ω at 20°C (68°F)
      1 - Body ground
      2 - Body ground
      10 kΩ or higher

      If the resistance is not as specified, replace the VSV assembly.

  1. Check VSV operation.

    1. A124792E01
      Check that air does not flow from port E to port F.

    2. A124793E01
      Apply battery positive voltage across the terminals.

    3. Check that air flows from port E to port F.
      If the result is not as specified, replace the VSV assembly.

← REMOVAL (from Jun 2009)INSTALLATION (Oct 2006 – May 2009) →