CD cannot be Inserted / Played or CD is Ejected Right After Insertion
Circuit diagnosis · Vehicles built from Jun 2009
INSPECTION PROCEDURE
| 1. CHECK IF A PROPER CD IS INSERTED |
Make sure that the CD is an audio CD that it is not deformed, flawed, stained, burred or otherwise defective.
- OK:
- Normal CD
- HINT:
- Translucent or uniquely-shaped CDs cannot be played.
- For details on playable CDs, refer to the Owner's Manual.
- Translucent or uniquely-shaped CDs cannot be played.
|
|
||||
| OK | |
| 2. CHECK THAT CD IS INSERTED PROPERLY |
Check whether or not the CD is inserted upside down.
- OK:
- CD is properly inserted.
|
|
||||
| OK | |
| 3. CHECK CD |
Clean the disc by wiping it with a soft cloth from the inside to the outside in a radial direction.

- OK:
- Malfunction disappears.
- NOTICE:
- Do not use a conventional record cleaner or antistatic preservative.
|
|
||||
| OK | ||
| ||
| 4. REPLACE CD WITH ANOTHER AND RECHECK |
Replace the CD with a normal one and check that the malfunction disappears.
- OK:
- Malfunction disappears.
- Result:
Result
Proceed to
OK
A
NG
(for 2GR-FE RHD)
B
NG
(except 2GR-FE RHD)
C
|
|
||||
|
|
||||
| A | ||
| ||
