CD Sound Skips
Circuit diagnosis · Vehicles built from Jun 2009
INSPECTION PROCEDURE
| 1. CHECK CD |
 |
- Check that the CD is not deformed or cracked.
- OK:
- No deformation or cracks on the CD
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 2. CHECK CD |
 |
- Check the CD.
- OK:
- The CD is clean.
- HINT:
- If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
- NOTICE:
- Do not use a conventional record cleaner or anti-static preservative.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 3. CHECK OPERATION USING ANOTHER CD |
 |
Check using another CD.
Check if the problem recurs using another CD.
- OK:
- The problem does not occur.
|
NG |
 |
|
|
|
| OK |
|
 |
|
|
| 4. CHECK RADIO AND DISPLAY ASSEMBLY |
 |
Check the radio and display assembly installation condition.
Check that the radio and display assembly is properly installed.
- OK:
- Radio and display assembly is properly installed.
- Result:
Result
|
Proceed to
|
NG
|
A
|
OK (for 2GR-FE RHD)
|
B
|
OK (except 2GR-FE RHD)
|
C
|
|
B |
 |
|
| REPLACE RADIO AND DISPLAY ASSEMBLY (for 2GR-FE RHD) (Click here)
|
|
|
|
C |
 |
|
| REPLACE RADIO AND DISPLAY ASSEMBLY (except 2GR-FE RHD) (Click here)
|
|
|
| A |
|
 |
|
| REINSTALL RADIO AND DISPLAY ASSEMBLY |
|