PUSH-BUTTON START FUNCTION:
Symptom
| Suspected Area
| See page
|
Power does not turn on (neither ACC nor IG is possible).
| 1. AM2 Fuse
|
Click here
|
2. Engine Switch
| -
|
3. Wire Harness or Connector
| -
|
4. Main Body ECU (Instrument Panel J/B)
| -
|
5. Certification ECU
| -
|
6. ID Code Box
| -
|
7. Steering Lock ECU
| -
|
8. Entry and System (Entry Function)
| -
|
Power is not turned on (only ACC is not turned on).
| 1. AM2 Fuse
|
Click here
|
2. Wire Harness or Connector
| -
|
3. Main Body ECU (Instrument Panel J/B)
| -
|
Power is not turned on (only IG is not turned on).
| 1. AM2 Fuse
|
Click here
|
2. IG1 Relay
| -
|
3. IG2 Relay
| -
|
4. Wire Harness or Connector
| -
|
5. Main Body ECU (Instrument Panel J/B)
| -
|
Engine does not start.
| 1. Main Body ECU (Instrument Panel J/B)
|
Click here
|
2. Certification ECU
| -
|
3. Shift Lock Control ECU
| -
|
4. ID Code Box
| -
|
5. Stop SW Fuse
| -
|
6. Stop Light Switch
| -
|
7. Electrical Steering Lock Function
| -
|
8. Engine Control System
| -
|
9. Engine Immobiliser System
| -
|
10. Wire Harness or Connector
| -
|
Engine switch indicator light does not come on.
| Engine Switch Indicator Light Circuit
|
Click here
|