POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on Driver Door Window Only) > HOW TO PROCEED WITH TROUBLESHOOTING |
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK |
| |||||
| 3.CHECK COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM |
Use the intelligent tester, inspect the LIN communication function to ensure there are no malfunctions in the communication system.
| Result | Proceed to |
| No DTCs output | A |
| DTCs output | B |
|
| ||||
| |||||
| 4.PROBLEM SYMPTOMS TABLE |
| |||||
| 5.OVERALL ANALYSIS AND TROUBLESHOOTING |
Data list/Active test
Circuit inspection
Terminal of ECU
| |||||
| 6.ADJUST, REPAIR OR REPLACE |
| |||||
| 7.RESET POWER WINDOW MOTOR |
|
| ||||
|---|---|---|---|---|---|