POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on 4 Windows) > All Power Window Up Functions do not Operate with Entry Lock Switch |
| 1.CHECK BASIC FUNCTION (ENTRY AND START SYSTEM (for Entry Function)) |
Check that the entry lock switch operates normally (Click here).
|
| ||||
| OK | |
| 2.CHECK MANUAL UP / DOWN FUNCTION |
Check that the manual up/down function using the multiplex network master switch assembly and power window regulator switch assembly can operate all the power windows (Click here).
|
| ||||
| OK | |
| 3.CHECK REMOTE UP / DOWN FUNCTION |
Check that the remote up/down function using the multiplex network master switch assembly operates the power windows (Click here).
|
| ||||
| OK | ||
| ||