Home › Engine / Hybrid System › 2AR-FE FUEL › FUEL TANK
RM19V0EQ _51 Engine / Hybrid System _014575 2AR-FE FUEL _0073940 FUEL TANK A

2AR-FE FUEL  FUEL TANK  REMOVAL  


PROCEDURE

Hide 77020A 1.REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

Hide 2.DRAIN FUEL

Hide 17420 3.REMOVE CENTER EXHAUST PIPE ASSEMBLY

Hide 57536A 4.REMOVE FRONT FLOOR BRACE LH (for Sport Package)

a.
A347593C01
2.896,1.313 3.052,1.51 0.156,0.198 10 false .
V100135

Bolt
V100136

Nut


Remove the bolt, 2 nuts and front floor brace LH.


Hide 57535A 5.REMOVE FRONT FLOOR BRACE RH (for Sport Package)

a.
A347594C01
0.51,1.292 0.667,1.49 0.156,0.198 10 false .
V100135

Bolt
V100136

Nut


Remove the bolt, 2 nuts and front floor brace RH.


Hide 46420 6.SEPARATE NO. 2 PARKING BRAKE CABLE ASSEMBLY

a.
A339046C01
2.719,1.25 2.813,1.375 0.094,0.125 6 false .
V100135

Bolt
V100136

Nut


Remove the bolt and nut, and separate the No. 2 parking brake cable assembly.


Hide 46430 7.SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY

a.
A339047C01
0.479,1.021 0.573,1.146 0.094,0.125 6 false .
V100135

Bolt
V100136

Nut


Remove the bolt and nut, and separate the No. 3 parking brake cable assembly.


Hide 48832A 8.REMOVE REAR NO. 1 STABILIZER BAR BRACKET

a.
A255957

Remove the 4 bolts and 2 rear No. 1 stabilizer bar brackets.


Hide 77631A 9.REMOVE LOWER CENTER FUEL TANK PROTECTOR

a.
A135224

Remove the 4 bolts and lower center fuel tank protector.


Hide 77209B 10.DISCONNECT FUEL PUMP TUBE SUB-ASSEMBLY

a.
A254979C07
2.083,3.667 2.177,3.573 2.177,3.573 2.24,3.573 false 2.167,4 2.281,4.104 2.281,4.104 2.281,4.177 false 1.677,3.667 1.427,3.427 1.427,3.427 1.333,3.427 false 1.552,4.021 1.552,4.229 1.552,4.229 1.198,4.229 false 1.438,4.01 1.438,4.219 false 2.75,0.521 2.948,1.021 2.948,1.021 2.75,0.938 true 2.292,3.51 2.625,3.698 0.333,0.188 10 false *a 2.229,4.198 2.573,4.385 0.344,0.188 10 false *b 1.156,3.365 1.479,3.531 0.323,0.167 10 false *c 1.01,4.156 1.302,4.344 0.292,0.188 10 false *d 2.906,1.042 3.24,1.229 0.333,0.188 10 false *a
*a Retainer
*b Fuel Pipe
*c Fuel Tube Connector
*d O-ring
V100135

Pinch
V100136

Pull


Disconnect the fuel pump tube sub-assembly.

NOTICE:

Remove any foreign matter on the fuel tube connector and fuel pipe before performing this work.


i.

Pinch the retainer of the fuel tube connector, and then pull the fuel tube connector off of the fuel pipe.

NOTICE:

Be sure to disconnect the fuel tube connector by hand.



ii.

If the fuel tube connector and fuel pipe are stuck, push and pull the fuel tube connector to release it. Pull the fuel tube connector off of the fuel pipe carefully.

NOTICE:
·

Be sure to disconnect the fuel tube connector by hand.

·

Do not scratch or allow any foreign matter to get on the parts when disconnecting them as the fuel tube connector has O-rings that seal the pipe (fuel pipe).




iii.

Check that there is no foreign matter on the sealing surfaces of the disconnected fuel lines. Clean them if necessary.


iv.

Cover the disconnected fuel pipe and fuel tube connector with plastic bags to prevent damage and contamination.



Hide 77100 11.REMOVE FUEL TANK ASSEMBLY

a.
A137480

Slide the clip and disconnect the fuel emission hose from the charcoal canister assembly.


b.
A255934

Support the fuel tank assembly using an engine lifter.

HINT:

Using height adjustment attachments and plate lift attachments, keep the fuel tank assembly horizontal.



c.
A255935

Remove the 2 bolts of the fuel tank bands.


d.

Slightly lower the engine lifter.


e.
A254980

Loosen the clamp, then disconnect the fuel tank to filler pipe hose from the fuel tank assembly.


f.
A255933

Loosen the clamp, then disconnect the breather tube fuel hose from the fuel tank assembly.


g.

Lower the engine lifter to remove the fuel tank assembly.

NOTICE:
·

Slowly operate the engine lifter to lower the fuel tank assembly.

·

Be careful not to drop the fuel tank assembly.

·

When removing the fuel tank assembly, tilt it slightly to prevent it from interfering with the suspension arm or other surrounding parts.




h.
A079478C01
2.781,1.146 2.927,0.375 2.927,0.375 3.083,0.375 true 1.083,1.271 1.229,0.5 1.229,0.5 1.385,0.5 true 0.698,1.698 0.448,1.698 true 2.417,1.688 2.073,1.688 true 1.438,0.427 1.75,0.583 0.313,0.156 10 false *1 3.135,0.313 3.406,0.469 0.271,0.156 10 false *1 0.26,1.615 0.573,1.771 0.313,0.156 10 false *2 1.896,1.615 2.208,1.771 0.313,0.156 10 false *2
*1 Pin
*2 Fuel Tank Band


Remove the 2 pins and 2 fuel tank bands as shown in the illustration.


i.
A136004

Remove the 4 clip nuts from the fuel tank assembly.


Hide 77651A 12.REMOVE NO. 1 FUEL TANK CUSHION

a.
A347595

Remove the No. 1 fuel tank cushion from the fuel tank assembly.


Hide 77652A 13.REMOVE NO. 2 FUEL TANK CUSHION

a.
A347596

Remove the 7 No. 2 fuel tank cushions from the fuel tank assembly.


Hide 77642A 14.REMOVE NO. 2 FUEL TANK PROTECTOR

a.
A296961

Disengage the 2 claws and remove the No. 2 fuel tank protector by sliding it as shown in the illustration.


Hide 77643A 15.REMOVE NO. 3 FUEL TANK PROTECTOR

a.
A296962

Disengage the 2 claws and remove the No. 3 fuel tank protector by sliding it as shown in the illustration.


Hide 77340A 16.REMOVE FUEL CUT OFF WITH TUBE VALVE ASSEMBLY

a.
A341532C01
0.802,3.083 1.073,3.083 false 1.083,2.781 1.354,2.781 false 1.094,2.094 1.198,1.792 1.198,1.792 1.313,1.792 false 2.583,1.208 2.979,1.208 false 0.646,3.01 0.958,3.167 0.313,0.156 10 false *1 1.365,1.719 1.563,1.885 0.198,0.167 10 true *2 3.021,1.135 3.333,1.292 0.313,0.156 10 false *3 0.917,2.698 1.229,2.854 0.313,0.156 10 false *a
*1 Fuel Tank Breather Tube Gasket
*2 Fuel Cut Off with Tube Valve Assembly
*3 Fuel Emission Hose
*a Fuel Cut Off Valve


Slide the clip and disconnect the fuel emission hose from the fuel cut off with tube valve assembly.


b.

Disengage the 2 clamps to disconnect the fuel cut off with tube valve assembly from the fuel tank assembly.


c.

Insert a clip remover between the fuel cut off valve and fuel tank breather tube gasket and remove the fuel cut off valve by gradually pushing it upward.

NOTICE:
·

Work carefully to maintain the sealing integrity of the fuel cut off valve as it is made from resin and easy to be damaged if forcibly removing and installing it.

·

Be sure to install a new fuel cut off with tube valve assembly and 2 new fuel tank breather tube gaskets.




d.

Remove the 2 fuel tank breather tube gaskets from the fuel tank assembly.


Hide 77209B 17.REMOVE FUEL PUMP TUBE SUB-ASSEMBLY

a.
A255959

Disengage the 2 clamps to remove the fuel pump tube sub-assembly from the fuel tank assembly.


Hide 77246C 18.REMOVE FUEL MAIN TUBE SUPPORT

a.
A079481

Remove the bolt and fuel main tube support from the fuel tank assembly.


Hide 77289C 19.REMOVE NO. 4 FUEL TUBE CLAMP

a.
A136011

Remove the 3 No. 4 fuel tube clamps from the fuel tank assembly.


Hide 77011 20.REMOVE LOWER FUEL TANK FILLER PIPE SUB-ASSEMBLY

a.
A380594

Remove the 5 bolts, lower fuel tank filler pipe sub-assembly and gasket from the fuel tank assembly.